Dish Network DVR-7000 manual Connect Your Equipment

Page 11

EchoStar International Corporation

All rights reserved

© 2002

 

Installation

Section 3

1.CONNECT YOUR EQUIPMENT

It is possible to connect the different equipment with the use of UHF coaxial cables, SCART cables, and/or so called audio/video cables with RCA connectors.

WARNING

ALL EQUIPMENT INVOLVED IN THE INSTALLATION TASK MUST BE INSTALLED CORRECTLY

AND SWITCHED OFF. MAKE SURE THAT IT IS SAFE TO PROCEED WITH THE INSTALLATION

TASK. UNSAFE CIRCUITS AND INSTALLATIONS CAN CAUSE (SERIOUS) INJURY OR DAMAGE

TO EQUIPMENT.

CONNECTION WITH UHF COAXIAL CABLES

1.On the TV, find the UHF-coaxial cable that is connected to the terrestrial antenna or cable network.

2.Remove the UHF-coaxial cable from the TV and make sure the cable condition is OK.

3. On the rear panel of the receiver find the TV OUT connector.

3

 

4.Install an UHF-coaxial cable between the TV OUT connector (receiver) and the antenna connector (TV).

5.On the rear panel of the receiver find the ANT IN connector.

6.Install the UHF-connector (terrestrial antenna) to the ANT IN connector (receiver).

CONNECTION WITH SCART CABLES

1.On the TV find the SCART cable that is connected to the VCR.

2.Remove the SCART connector that is connected to the VCR from the TV.

3.On the rear panel of the receiver find the DECODER, TV and VCR SCART connectors.

4.Install a full featured SCART cable between the decoder and the DECODER SCART connector (receiver).

5.Install a full featured SCART cable between the VCR and the VIDEO SCART connector (receiver).

6.Install a full featured SCART cable between the TV SCART connector (receiver) and the SCART connector on the TV (old SCART connection to the VCR).

CONNECTION WITH AUDIO/VIDEO CABLE (RCA-CONNECTORS)

1.On the rear panel of the receiver find the VIDEO, AUDIO L and AUDIO R connectors.

2.Install an audio/video cable between:

a.the VIDEO connector of the receiver and TV (yellow);

b.the AUDIO L connector of the receiver and TV (white);

c.the AUDIO R connector of the receiver and TV (red).

CONNECTION WITH DOLBY DIGITAL AUDIO CABLE (RCA-CONNECTORS)

1.On the rear panel of the receiver find the S/PDIF connector.

2.Install an audio/video cable (black) between:

a.the S/PDIF connector (receiver) and Dolby Digital connection of the Dolby digital compatible installation.

CONNECTION WITH SERIAL CABLE (0-MODEM CABLE)

1.On the rear panel of the receiver find the SERIAL PORT connector.

2.Install a serial cable between the SERIAL PORT connector (receiver) and the serial port connection of the PC.

CONNECTION WITH USB CABLE

1.On the rear panel of the receiver find the USB connector.

2.Install a serial cable between the USB connector (receiver) and the USB connection of the PC.

Digital Satellite Receiver

Page 3 - 1

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DVR-7000 Viaccess Page Disclaimer Intended USE WarrantyDear Customer Copyright and Trademarks Preface Index Appendix Electrical Safety General SafetySymbols on the Rear Panel Symbols Used on the ReceiverSymbols on the Front Panel Disposal of Your Packing Materials Contents of the BOXStorage and Transport To Unpack Your ReceiverDish To Setup Your Peripheral EquipmentTo Setup the Receiver Terrestrial AntennaConnect Your Equipment Connect a Dish Fixed Dish Installation with Diseqc Switch To Setup Your Receiver for the First Time For Fixed and Diseqc 1..4 Switch Installations For signal verification For Motorized Installations Manual Selection For Smatv Installations Receiver Front Panel ReceiverReceiver Rear Panel M2 connector spring-clipRewind Remote Control Unit RCUEchonav User Interface Echonav Installation MenuUser Preferences Menu Parental Lock User ProfileLanguages TV System Local TimeInstallation Setup Menu LNB1 System Setup MenuProgram Satellites Fixed Dish SetupAbout Echostar User LNB SettingFactory Reset System UpgradeCI-MODULES CI Information MenuIntroduction Echonav Mode and Selection MenusEdit Sort Electronic Program Guide EPGTimers Radio Infobanner Infobanner and POP-UP MenusTV Infobanner MP3 Infobanner DVR InfobannerSatellite List POP-UP MenusSubtitle To Select a Channel To Select a ModeTo Navigate Through the Menus To Sort a List To Select a ListTo Group a List To Move a Channel To Edit a ListTo Lock a Channel To Rename a Channel or Recording To SET the Channel Volume OffsetTo Delete a Channel To Hide a Channel USE the Favorite Lists ADD a Group of Channels to a Favorite List ADD a Channel to a Favorite ListRename a Favorite List To USE the Electronic Program Guide EPG To SET a Timer Change the repetition rate Use Key, to go to the Period To Select the Alternate Audio Delete a TimerUSE the Infobanner Related Functions Play Back a Recording To Select the Subtitle LanguageTo Select Another Satellite To USE the DVRPlay Back the Index Marker USE the Index MarkerCapture a Personal Background USE the A-B MarkerUSE Live Pause Install a Personal BackgroundPlay Back a Song To USE the MP3 PlayerTo Change the User Profile To SET the User PreferencesTo Change the PIN Code To Change the LanguageTo SET the Parental Lock To SET the TV System To SET the Local Date and TimeOperation To Change the Setup of the Receiver Hardware MaintenanceSoftware Maintenance About Echostar Receiver Information To Change the User LNB SettingsTo do a Factory Reset To do a Software Update from the SatelliteTo ADD a Satellite To GET Conditional Access InformationTo ADD a Transponder To ADD a PID END of Life Disposal Maintenance EPG Related GeneralTV and Radio Related DVR Related Remote Control Unit RCU RelatedMP3 Player Related Installation RelatedMind dish damage, revise Troubleshooting Min ute List of Used AbbreviationsCcitt Explanation of Used TerminologyGlossary Smart Card Explanation of the Search ModesIndex Section Index User Defined Lnbf Matrix LNB Configuration MatrixLnbf Configuration Matrix Appendix 1 Lnbf Configuration matrix Keys IntroductionBatteries EchoStar DVR-7000 Viaccess Program the TV, VCR and AUX KEY Setup with USE of the Equipment Code ListRead OUT the Equipment Code Special Setup FunctionsSetup with USE of the Search Code Feature Reset Volume Lock Punch Through Setup a Second TV or VCRUndo the Setup of a Second TV or VCR Volume Lock Punch ThroughREAL-TIME Macros Factory ResetFull Factory Reset TroubleshootingEchostar Satellite Receivers Equipment CodesKEY KEY D2500 I.P AD2000 I.P SR200 I.P SR5500 LT7500 D2500 I.P AD2000 I.P SR200 I.P SR5500 LT7500 Miscelleneous Audio BPL RBM GEC Video Recorders ITV DVD

DVR-7000 specifications

The Dish Network DVR-7000 is a remarkable digital video recorder that revolutionized home entertainment during its time of release. With its user-friendly interface and state-of-the-art technology, the DVR-7000 allowed viewers to take control of their viewing experience like never before.

One of the main features of the DVR-7000 is its ability to record multiple programs simultaneously. Equipped with dual tuners, this device enables users to watch one show while recording another, ensuring they never miss their favorite content. This capability is particularly beneficial during peak viewing hours when multiple popular shows air concurrently.

In terms of storage, the DVR-7000 provides ample space for users to save their favorite programs. With a hard drive capacity of 120 gigabytes, it can store approximately 100 hours of standard-definition content, allowing binge-watchers and series enthusiasts to keep their favorite shows at their fingertips. This storage capacity also means less time spent managing recordings, as users can save more content before needing to delete anything.

The DVR-7000 boasts advanced playback features, allowing users to pause, rewind, and fast-forward live television. This functionality empowers viewers to take breaks during their programs and catch up later without missing any crucial moments. Additionally, the device supports features like Instant Replay, which allows users to quickly re-watch a specific segment of a show.

Connectivity is another key characteristic of the DVR-7000. The device includes multiple outputs, including HDMI and component video, ensuring compatibility with modern televisions. Its Ethernet port also allows users to connect to the internet, providing access to Dish Network’s On Demand content, enabling users to stream a variety of movies and shows at their leisure.

The user interface of the DVR-7000 is designed for ease of navigation, featuring an intuitive electronic programming guide (EPG). This guide allows users to explore program listings, set recordings, and access additional information about shows with minimal effort.

Overall, the Dish Network DVR-7000 showcases significant advancements in the realm of home entertainment technology. Its discending features, robust storage options, and user-friendly interface helped to enhance the viewing experiences of countless households. Despite the continued evolution of DVR technology, the DVR-7000 remains a notable device in the annals of home entertainment history.
Top Page Image Contents