Dish Network DVR-7000 Special Functions, Setup a Second TV or VCR, Volume Lock Punch Through

Page 87

EchoStar International Corporation

All rights reserved

© 2002

 

EchoStar Quattro, Programmable Remote Control Unit Appendix 2

5.1. SETUP A SECOND TV OR VCR

NOTE

The procedure to assign a second TV or VCR is identical, therefor only the procedure to assign the second TV is given.

1.

On the RCU, press the TV key continuously until the indicator stays on.

 

2.

Release the TV key and make sure the indicator blinks continuously.

 

3.

Use the numerical keys to enter code 9 9 2.

A2

4.

Monitor the TV key and note that the indicator goes on and off and finally stays on.

5.Press the VCR key once and note that the indicator goes on and off and finally stays off.

6.Now the VCR key is assigned as a TV key.

7.Setup the VCR key to control your second TV, refer to chapter 4 for detailed instructions.

5.2.UNDO THE SETUP OF A SECOND TV OR VCR

NOTE

The procedure to undo an assignment for the TV or VCR is identical, therefor only the procedure to undo the assignment of the VCR key as a second TV is given.

1.On the RCU, press the VCR key continuously until the indicator stays on.

2.Release the VCR key and make sure the indicator blinks continuously.

3.Use the numerical keys to enter code 9 9 2.

4.Monitor the VCR key and note that the indicator goes on and off and finally stays on.

5.Press the VCR key once and note that the indicator goes on and off and finally stays off.

6.Now the VCR key is assigned as a VCR key.

7.Setup the VCR key to control your VCR, refer to chapter 4 for detailed instructions.

6.SPECIAL FUNCTIONS

6.1. VOLUME LOCK (PUNCH THROUGH)

The RCU allows you to select the device that you want to control the volume of, independently from any other mode. As an example, if you are in the SAT mode, you can stay in the SAT mode and adjust the volume of the TV directly with the volume +/- key.

NOTE

The procedures to set the volume lock for the TV, VCR, DVD and Audio equipment is identical, therefor only the procedure to set the volume lock for the TV is given.

1.On the RCU, press the TV key continuously until the indicator stays on.

2.Release the TV key and make sure the indicator blinks continuously.

3.Use the numerical keys to enter code 9 9 3.

4.Press the TV key once.

5.Monitor the TV key and note that the indicator blinks three times.

6.Now the volume control is locked to the TV except for the AUX mode.

6.2.RESET VOLUME LOCK (PUNCH THROUGH)

1.On the RCU, press the SAT key continuously until the indicator stays on.

2.Release the SAT key and make sure the indicator blinks continuously.

3.Use the numerical keys to enter code 9 9 3.

4.Press the Volume + key once and note that the indicator blinks four times.

5.Now the volume control is unlocked to control the device that belongs to that key.

Digital Satellite Receiver

Page A2 - 5

Page 86 Page 88
Image 87
Page 86 Page 88
Contents DVR-7000 Viaccess Page Intended USE Warranty Dear CustomerDisclaimer Copyright and Trademarks Preface Index Appendix Electrical Safety General SafetySymbols Used on the Receiver Symbols on the Front PanelSymbols on the Rear Panel Disposal of Your Packing Materials Contents of the BOXStorage and Transport To Unpack Your ReceiverDish To Setup Your Peripheral EquipmentTo Setup the Receiver Terrestrial AntennaConnect Your Equipment Connect a Dish Fixed Dish Installation with Diseqc Switch To Setup Your Receiver for the First Time For Fixed and Diseqc 1..4 Switch Installations For signal verification For Motorized Installations Manual Selection For Smatv Installations Receiver Front Panel ReceiverReceiver Rear Panel M2 connector spring-clipRewind Remote Control Unit RCUEchonav User Interface Echonav Installation MenuUser Preferences Menu User Profile LanguagesParental Lock TV System Local TimeInstallation Setup Menu LNB1 System Setup MenuProgram Satellites Fixed Dish SetupAbout Echostar User LNB SettingFactory Reset System UpgradeCI-MODULES CI Information MenuIntroduction Echonav Mode and Selection MenusEdit Sort Electronic Program Guide EPGTimers Infobanner and POP-UP Menus TV InfobannerRadio Infobanner MP3 Infobanner DVR InfobannerPOP-UP Menus SubtitleSatellite List To Select a Mode To Navigate Through the MenusTo Select a Channel To Select a List To Group a ListTo Sort a List To Move a Channel To Edit a ListTo Lock a Channel To SET the Channel Volume Offset To Delete a ChannelTo Rename a Channel or Recording To Hide a Channel USE the Favorite Lists ADD a Group of Channels to a Favorite List ADD a Channel to a Favorite ListRename a Favorite List To USE the Electronic Program Guide EPG To SET a Timer Change the repetition rate Use Key, to go to the Period Delete a Timer USE the Infobanner Related FunctionsTo Select the Alternate Audio Play Back a Recording To Select the Subtitle LanguageTo Select Another Satellite To USE the DVRPlay Back the Index Marker USE the Index MarkerCapture a Personal Background USE the A-B MarkerUSE Live Pause Install a Personal BackgroundPlay Back a Song To USE the MP3 PlayerTo Change the User Profile To SET the User PreferencesTo Change the Language To SET the Parental LockTo Change the PIN Code To SET the TV System To SET the Local Date and TimeOperation Hardware Maintenance Software MaintenanceTo Change the Setup of the Receiver About Echostar Receiver Information To Change the User LNB SettingsTo do a Factory Reset To do a Software Update from the SatelliteTo ADD a Satellite To GET Conditional Access InformationTo ADD a Transponder To ADD a PID END of Life Disposal Maintenance EPG Related GeneralTV and Radio Related DVR Related Remote Control Unit RCU RelatedMP3 Player Related Installation RelatedMind dish damage, revise Troubleshooting Min ute List of Used AbbreviationsCcitt Explanation of Used TerminologyGlossary Smart Card Explanation of the Search ModesIndex Section Index LNB Configuration Matrix Lnbf Configuration MatrixUser Defined Lnbf Matrix Appendix 1 Lnbf Configuration matrix Introduction BatteriesKeys EchoStar DVR-7000 Viaccess Program the TV, VCR and AUX KEY Setup with USE of the Equipment Code ListSpecial Setup Functions Setup with USE of the Search Code FeatureRead OUT the Equipment Code Reset Volume Lock Punch Through Setup a Second TV or VCRUndo the Setup of a Second TV or VCR Volume Lock Punch ThroughREAL-TIME Macros Factory ResetFull Factory Reset TroubleshootingEchostar Satellite Receivers Equipment CodesKEY KEY D2500 I.P AD2000 I.P SR200 I.P SR5500 LT7500 D2500 I.P AD2000 I.P SR200 I.P SR5500 LT7500 Miscelleneous Audio BPL RBM GEC Video Recorders ITV DVD

DVR-7000 specifications

The Dish Network DVR-7000 is a remarkable digital video recorder that revolutionized home entertainment during its time of release. With its user-friendly interface and state-of-the-art technology, the DVR-7000 allowed viewers to take control of their viewing experience like never before.

One of the main features of the DVR-7000 is its ability to record multiple programs simultaneously. Equipped with dual tuners, this device enables users to watch one show while recording another, ensuring they never miss their favorite content. This capability is particularly beneficial during peak viewing hours when multiple popular shows air concurrently.

In terms of storage, the DVR-7000 provides ample space for users to save their favorite programs. With a hard drive capacity of 120 gigabytes, it can store approximately 100 hours of standard-definition content, allowing binge-watchers and series enthusiasts to keep their favorite shows at their fingertips. This storage capacity also means less time spent managing recordings, as users can save more content before needing to delete anything.

The DVR-7000 boasts advanced playback features, allowing users to pause, rewind, and fast-forward live television. This functionality empowers viewers to take breaks during their programs and catch up later without missing any crucial moments. Additionally, the device supports features like Instant Replay, which allows users to quickly re-watch a specific segment of a show.

Connectivity is another key characteristic of the DVR-7000. The device includes multiple outputs, including HDMI and component video, ensuring compatibility with modern televisions. Its Ethernet port also allows users to connect to the internet, providing access to Dish Network’s On Demand content, enabling users to stream a variety of movies and shows at their leisure.

The user interface of the DVR-7000 is designed for ease of navigation, featuring an intuitive electronic programming guide (EPG). This guide allows users to explore program listings, set recordings, and access additional information about shows with minimal effort.

Overall, the Dish Network DVR-7000 showcases significant advancements in the realm of home entertainment technology. Its discending features, robust storage options, and user-friendly interface helped to enhance the viewing experiences of countless households. Despite the continued evolution of DVR technology, the DVR-7000 remains a notable device in the annals of home entertainment history.
Top Page Image Contents