Dish Network DVR-7000 manual Special Setup Functions, Setup with USE of the Search Code Feature

Page 86

Appendix 2 EchoStar Quattro, Programmable Remote Control Unit

4.2. SETUP WITH USE OF THE SEARCH CODE FEATURE

NOTE

■A completed search is indicated by eight blinks.

■If the original remote control unit for the VCR, DVD or audio device does not have a on/off key: before you continue insert a tape or disk before you continue;

■For some codes the play or Volume + key might work.

1.Switch your TV to on and make sure a broadcast is seen.

2.On the RCU, press the TV key continuously until the indicator stays on.

3.Release the TV key and make sure the indicator blinks continuously.

4.On the RCU, press the on/standby key and make sure the indicator of the TV key stays on.

5.Press the up key once and see if the TV switches off.

Make sure you wait at least 2 seconds to allow the TV to respond.

6.If the TV does not switch off, repeat step 5 until the TV switches off.

7.After the TV switched off, press the OK key to store the code.

8.On the RCU, press the on/off key. See that the TV key blinks once and the TV switches on.

9.Now your are ready to read-out the code from the memory for future use.

4.3.READ OUT THE EQUIPMENT CODE

NOTE

You can read out the code from the RCU, just blink back the code. It is handy for future reference. Remember you only can blink back the code after the RCU operates your device.

1.Switch your TV to on and make sure a broadcast is seen.

2.On the RCU, press the TV key continuously until the indicator stays on.

3.Release the TV key and make sure the indicator blinks continuously.

4.Use the numerical keys to enter code 9 9 0.

5.Monitor the TV key and note that the indicator goes off and stays off.

NOTE

The amount of blinks gives you the first number, no blinks indicate a 0.

6.Press the numerical key 1 and count the blinks for the first number.

7.Press the numerical key 2 and count the blinks for the second number.

8.Press the numerical key 3 and count the blinks for the third number.

9.Press the numerical key 4 and count the blinks for the fourth number.

10.Write the code, with a permanent pen, in the boxes in the battery cover and this manual.

11.Now the RCU is programmed to control your TV.

5.SPECIAL SETUP FUNCTIONS

It is possible to control a second TV or VCR with your RCU. One of the other mode keys (TV, VCR, AUX) must be sacrificed in this case. It is not possible to sacrifice the SAT key.

It is also possible to control another (up to 16) EchoStar receivers that use the equipment code 0222. This is done with use of the address feature in the SAT mode.

© 2002 EchoStar International Corporation All rights reserved

Page A2 - 4

EchoStar DVR-7000 Viaccess

Page 85 Page 87
Image 86
Page 85 Page 87
Contents DVR-7000 Viaccess Page Disclaimer Intended USE WarrantyDear Customer Copyright and Trademarks Preface Index Appendix General Safety Electrical SafetySymbols on the Rear Panel Symbols Used on the ReceiverSymbols on the Front Panel To Unpack Your Receiver Contents of the BOXStorage and Transport Disposal of Your Packing MaterialsTerrestrial Antenna To Setup Your Peripheral EquipmentTo Setup the Receiver DishConnect Your Equipment Connect a Dish Fixed Dish Installation with Diseqc Switch To Setup Your Receiver for the First Time For Fixed and Diseqc 1..4 Switch Installations For signal verification For Motorized Installations Manual Selection For Smatv Installations Receiver Receiver Front PanelM2 connector spring-clip Receiver Rear PanelRemote Control Unit RCU RewindEchonav Installation Menu Echonav User InterfaceUser Preferences Menu Parental Lock User ProfileLanguages Local Time TV SystemInstallation Setup Menu System Setup Menu LNB1Fixed Dish Setup Program SatellitesUser LNB Setting About EchostarSystem Upgrade Factory ResetCI Information Menu CI-MODULESEchonav Mode and Selection Menus IntroductionEdit Electronic Program Guide EPG SortTimers Radio Infobanner Infobanner and POP-UP MenusTV Infobanner DVR Infobanner MP3 InfobannerSatellite List POP-UP MenusSubtitle To Select a Channel To Select a ModeTo Navigate Through the Menus To Sort a List To Select a ListTo Group a List To Edit a List To Move a ChannelTo Lock a Channel To Rename a Channel or Recording To SET the Channel Volume OffsetTo Delete a Channel To Hide a Channel USE the Favorite Lists ADD a Channel to a Favorite List ADD a Group of Channels to a Favorite ListRename a Favorite List To USE the Electronic Program Guide EPG To SET a Timer Change the repetition rate Use Key, to go to the Period To Select the Alternate Audio Delete a TimerUSE the Infobanner Related Functions To USE the DVR To Select the Subtitle LanguageTo Select Another Satellite Play Back a RecordingUSE the Index Marker Play Back the Index MarkerUSE the A-B Marker Capture a Personal BackgroundInstall a Personal Background USE Live PauseTo USE the MP3 Player Play Back a SongTo SET the User Preferences To Change the User ProfileTo Change the PIN Code To Change the LanguageTo SET the Parental Lock To SET the Local Date and Time To SET the TV SystemOperation To Change the Setup of the Receiver Hardware MaintenanceSoftware Maintenance To Change the User LNB Settings About Echostar Receiver InformationTo do a Software Update from the Satellite To do a Factory ResetTo GET Conditional Access Information To ADD a SatelliteTo ADD a Transponder To ADD a PID END of Life Disposal Maintenance General EPG RelatedTV and Radio Related Remote Control Unit RCU Related DVR RelatedInstallation Related MP3 Player RelatedMind dish damage, revise Troubleshooting List of Used Abbreviations Min uteExplanation of Used Terminology CcittGlossary Explanation of the Search Modes Smart CardIndex Section Index User Defined Lnbf Matrix LNB Configuration MatrixLnbf Configuration Matrix Appendix 1 Lnbf Configuration matrix Keys IntroductionBatteries EchoStar DVR-7000 Viaccess Setup with USE of the Equipment Code List Program the TV, VCR and AUX KEYRead OUT the Equipment Code Special Setup FunctionsSetup with USE of the Search Code Feature Volume Lock Punch Through Setup a Second TV or VCRUndo the Setup of a Second TV or VCR Reset Volume Lock Punch ThroughFactory Reset REAL-TIME MacrosTroubleshooting Full Factory ResetEquipment Codes Echostar Satellite ReceiversKEY KEY D2500 I.P AD2000 I.P SR200 I.P SR5500 LT7500 D2500 I.P AD2000 I.P SR200 I.P SR5500 LT7500 Miscelleneous Audio BPL RBM GEC Video Recorders ITV DVD

DVR-7000 specifications

The Dish Network DVR-7000 is a remarkable digital video recorder that revolutionized home entertainment during its time of release. With its user-friendly interface and state-of-the-art technology, the DVR-7000 allowed viewers to take control of their viewing experience like never before.

One of the main features of the DVR-7000 is its ability to record multiple programs simultaneously. Equipped with dual tuners, this device enables users to watch one show while recording another, ensuring they never miss their favorite content. This capability is particularly beneficial during peak viewing hours when multiple popular shows air concurrently.

In terms of storage, the DVR-7000 provides ample space for users to save their favorite programs. With a hard drive capacity of 120 gigabytes, it can store approximately 100 hours of standard-definition content, allowing binge-watchers and series enthusiasts to keep their favorite shows at their fingertips. This storage capacity also means less time spent managing recordings, as users can save more content before needing to delete anything.

The DVR-7000 boasts advanced playback features, allowing users to pause, rewind, and fast-forward live television. This functionality empowers viewers to take breaks during their programs and catch up later without missing any crucial moments. Additionally, the device supports features like Instant Replay, which allows users to quickly re-watch a specific segment of a show.

Connectivity is another key characteristic of the DVR-7000. The device includes multiple outputs, including HDMI and component video, ensuring compatibility with modern televisions. Its Ethernet port also allows users to connect to the internet, providing access to Dish Network’s On Demand content, enabling users to stream a variety of movies and shows at their leisure.

The user interface of the DVR-7000 is designed for ease of navigation, featuring an intuitive electronic programming guide (EPG). This guide allows users to explore program listings, set recordings, and access additional information about shows with minimal effort.

Overall, the Dish Network DVR-7000 showcases significant advancements in the realm of home entertainment technology. Its discending features, robust storage options, and user-friendly interface helped to enhance the viewing experiences of countless households. Despite the continued evolution of DVR technology, the DVR-7000 remains a notable device in the annals of home entertainment history.
Top Page Image Contents