Kathrein UFD 515 manual Switching to a radio programme, Selecting a TV programme by number entry

Page 23

Programme selection

Selecting a TV programme by number entry

 

You can select a different TV programme during a running TV

 

programme by entering the programme location number. Use the

 

number buttons ￿to ￿for the purpose of entering the

 

programme locations.

Example

You wish to select the TV programme "DSF". This programme is

 

stored under the programme location number 15. (The order of TV

 

programmes is defined in the programme memory, and therefore this

 

only serves as an example.)

 

To select this programme, press the numbers ￿￿and ￿￿one

 

after the other. The receiver waits for about 3 seconds for entry of the

 

next number.

 

Follow the same procedure for all other programmes – i.e. also

 

programmes with three-digit programme location numbers. You do not

 

have to enter leading zeros.

Switching to a radio programme

You can switch over from a TV programme to a radio programme.

Press the ￿button on the remote control to switch to a radio programme.

The receiver switches over to the programme location of the last set radio programme. You can return to the TV programme by pressing

the same button or ￿. The corresponding display relating to the received programme, i.e. as when selecting the TV programmes, appears on the screen. The LCD display shows a small "r" together with the programme location number.

The screen turns dark after a few seconds.

Reception status - radio

After switching over the receiver, simply press the ￿￿￿buttons to select other radio programmes in their ascending or descending order in the programme memory.

Every time you press the button, an on-screen display shows you the selected channel together with the time, the programme start and end times as well as the programme title in the information box, provided this data is transmitted together with the signal.

By pressing the ￿￿button, this information box is permanently displayed. Press the button once again and the information box disappears.

A further option for selecting a different programme is to press the

23

Image 23
Contents Operating manual Page Important notes PrefaceContents Transponder selection DiSEqC Repeat Safety instructions Mains voltage Place of installationVentilation Humidity, exposure to sunlight, heatView of rear panel Controls, displays and connectionsView of front panel Remote control handset keys Command of remote control Button functions Operating instructionsMenu concept Alphanumeric entries Language selection- OSD Connection and start-up Connecting receiverPreconditions for receiving signals Presetting of receiving systemAudio connection Inserting batteries in the remote controlLNB supply voltage TV and video recorder connectionFirst steps First time installationFactory setting of receiver Help function On screen displays / OSDImportant screen displays Radio channel identifier Error messageTV channel identifier Teletext Programme list Radio/TVReception status Programme selectionSelecting a TV programme Programme selection Reception status radio Switching to a radio programmeSelecting a TV programme by number entry Selecting a radio programme by number entry Observe the operating manual of your Pay-TV provider Common InterfaceCommon Interface Common Interface Timer settings VPS signal Stereo and two-channel sound reproduction Sound settingsSetting the volume Switching off sound Favourite programmes Programme listSelecting programmes last received Programme list Programme list Programme list Programme list Search programme alphabetically Sorting programmes Deleting programme Manually adding programmes Be careful when deleting programmesProgramme list Adding and removing satellites Setting up a satelliteRemoving a satellite Entering a satellite nameEPG Programme overviewEPG timer programming Entering a password PasswordFactory setting Password Parental lock Password Operation from front panel Backup operationSetting system parameters System information System parametersScreen Local time/TimerTV type Picture formatMode Installation menuLNB configuration Oscillator frequency L.O Standby Antenna rotor / Positioner DiSEqC Antenna settingsSatellite search Setting system parameters Transponder selection TP set-up/searchAll new programmes are added to the existing programme list DiSEqC UFO Set-up KH signalTone burst Pre-programming is not deleted with Reset Playback Video recorder connectionRecording Software and programme list update Software and programme list update „Display info Transferring operating software Data transfer from receiver to receiverPreparation Transferring programme listsTechnical annex Technical featuresRF features Technical dataScart socket assignments AccessoriesSwitch-over VHS/S-VHS Connection arrangement Connection examplesTechnical annex DiSEqC Short technical lexiconTransponder GlossaryDiSEqC menu ServiceSatellite ZWT Technische Änderungen vorbehalten