Kathrein UFD 515 Sound settings, Setting the volume, Stereo and two-channel sound reproduction

Sound settings

Setting the volume

Set the required volume level by pressing the ￿￿ buttons on the remote control of the receiver. A bar indicator is displayed on the screen to show the set volume.

Stereo and two-channel sound reproduction

The channel identifier, which is displayed by pressing the ￿ button, shows the set sound reproduction. (Depending on the direction of the sound wave symbols –below the time of day –the sound setting may be mono left, mono right or stereo. The number indicates the number of transmitted sound channels). The programme title is shown in the box on the right.

Press the ￿button to call up the audio menu for sound and language selection. You can now make the required settings, e.g. language selection, provided the corresponding data is contained in the reception signal (sound track), Dolby Digital (5.1 CH). Select the

menu points by pressing the ￿￿buttons and select the

required setting with the ￿￿buttons. Press the ￿￿button once again to exit the menu.

If captions are transmitted, you can select the bar caption language with the ￿￿buttons and confirm by pressing ￿.

AC3

The receiver can process sound transmissions in AC3 format (Dolby Digital) providing you with the opportunity of listening to cinema sound quality in your living room. The digital sound output is provided for this purpose. You will need to connect it to a corresponding system.

Please refer to the instruction manual of your Dolby Digital system.

30