Adding and removing satellites
In the next step, move with to e.g. the entry „User1“.
After pressing the or button, you are asked if you want to add the satellites.
Confirm it with .
The following message appears
You can now make the respective entries to your receiving system in the corresponding positions using the ,and or buttons
and exit the menu by pressing three times. At the same time the new station data is stored.
Entering a satellite name
You can change the satellite name in the LNB configuration menu using the number buttons. Refer to section "operating instructions" for information about the exact procedure.
Removing a satellite
To remove a satellite, select the "LNB configuration" menu, move the
cursor bar with or and confirm by pressing the or button. You will now be asked whether you wish to remove the
satellite. You can either confirm your selection with or cancel with .
43