Kathrein UFD 515 manual Software and programme list update

Page 67

Software and programme list update

The light cursor bar in "Software download" can be moved with the

￿￿buttons. Press ￿ in the menu item "Display info" to receive information about the transmitted software and programme list. The menu items "Info text," "programme list" and "operating software" are automatically set to "Yes," when new information and contents are available. The lower bar displays the relative signal level.

The light cursor bar in "Software download" can be moved to the position which you want to deactivate (No) using the ￿￿and ￿

or ￿ buttons. Inactive positions cannot be changed. In the case, that you only want to update the software, but not the programme list, deactivate the field "programme list" and vice versa. You can call up the "info text."

For updating, move the cursor bar to "Start" and confirm it with ￿. Afterwards, the receiver begins with the update and a message below appears on the screen.

67

Image 67
Contents Operating manual Page Important notes PrefaceContents Transponder selection DiSEqC Repeat Safety instructions Mains voltage Place of installationVentilation Humidity, exposure to sunlight, heatView of front panel Controls, displays and connectionsView of rear panel Remote control handset keys Command of remote control Menu concept Operating instructionsButton functions Alphanumeric entries Language selection- OSD Connection and start-up Connecting receiverPreconditions for receiving signals Presetting of receiving systemAudio connection Inserting batteries in the remote controlLNB supply voltage TV and video recorder connectionFactory setting of receiver First time installationFirst steps Important screen displays On screen displays / OSDHelp function TV channel identifier Error messageRadio channel identifier Teletext Programme list Radio/TVSelecting a TV programme Programme selectionReception status Programme selection Selecting a TV programme by number entry Switching to a radio programmeReception status radio Selecting a radio programme by number entry Observe the operating manual of your Pay-TV provider Common InterfaceCommon Interface Common Interface Timer settings VPS signal Setting the volume Sound settingsStereo and two-channel sound reproduction Switching off sound Selecting programmes last received Programme listFavourite programmes Programme list Programme list Programme list Programme list Search programme alphabetically Sorting programmes Deleting programme Manually adding programmes Be careful when deleting programmesProgramme list Adding and removing satellites Setting up a satelliteRemoving a satellite Entering a satellite nameEPG Programme overviewEPG timer programming Factory setting PasswordEntering a password Password Parental lock Password Operation from front panel Backup operationSetting system parameters System information System parametersScreen Local time/TimerTV type Picture formatLNB configuration Installation menuMode Oscillator frequency L.O Standby Antenna rotor / Positioner DiSEqC Antenna settingsSatellite search Setting system parameters Transponder selection TP set-up/searchAll new programmes are added to the existing programme list DiSEqC UFO Set-up KH signalTone burst Pre-programming is not deleted with Reset Recording Video recorder connectionPlayback Software and programme list update Software and programme list update „Display info Transferring operating software Data transfer from receiver to receiverPreparation Transferring programme listsTechnical annex Technical featuresRF features Technical dataSwitch-over VHS/S-VHS AccessoriesScart socket assignments Connection arrangement Connection examplesTechnical annex DiSEqC Short technical lexiconTransponder GlossarySatellite ServiceDiSEqC menu ZWT Technische Änderungen vorbehalten