Kathrein UFD 515 manual Password

Ad

Page 47

Password

Carry out the following settings in this on-screen display:

Age limit: This setting is only effective, if the corresponding lock-out signals are sent together with the transmission.

Lock list: Yes/No. With this option you can lock or unlock the editing function for programme lists.

Lock installation: Yes/No. With this option, you can lock or grant access to the installation menu.

New password: Here, you can enter your (new) password with the aid of the number buttons.

Confirm password: Here, you enter your (new) password once again with the number buttons to serve as a confirmation.

Personal: Here, enter the receiver identification which is displayed when the receiver is turned on. This is useful for identification in case of theft. See section "Operating instructions" for information on how to use the numerical buttons on the remote control for alphanumerical entry. The factory setting is „UFD 515“.

You have now undertaken all the settings for safeguarding and identifying your satellite receiver.

If you have forgotten your password, you must contact your provider who can unlock your receiver again.

47

Image 47

Contents Operating manual Page Important notes PrefaceContents Transponder selection DiSEqC Repeat Safety instructions Mains voltage Place of installationVentilation Humidity, exposure to sunlight, heatView of rear panel Controls, displays and connectionsView of front panel Remote control handset keys Command of remote control Button functions Operating instructionsMenu concept Alphanumeric entries Language selection- OSD Connection and start-up Connecting receiverPreconditions for receiving signals Presetting of receiving systemAudio connection Inserting batteries in the remote controlLNB supply voltage TV and video recorder connectionFirst steps First time installationFactory setting of receiver Help function On screen displays / OSDImportant screen displays Radio channel identifier Error messageTV channel identifier Teletext Programme list Radio/TVReception status Programme selectionSelecting a TV programme Programme selection Reception status radio Switching to a radio programmeSelecting a TV programme by number entry Selecting a radio programme by number entry Observe the operating manual of your Pay-TV provider Common InterfaceCommon Interface Common Interface Timer settings VPS signal Stereo and two-channel sound reproduction Sound settingsSetting the volume Switching off sound Favourite programmes Programme listSelecting programmes last received Programme list Programme list Programme list Programme list Search programme alphabetically Sorting programmes Deleting programme Manually adding programmes Be careful when deleting programmesProgramme list Adding and removing satellites Setting up a satelliteRemoving a satellite Entering a satellite nameEPG Programme overviewEPG timer programming Entering a password PasswordFactory setting Password Parental lock Password Operation from front panel Backup operationSetting system parameters System information System parametersScreen Local time/TimerTV type Picture formatMode Installation menuLNB configuration Oscillator frequency L.O Standby Antenna rotor / Positioner DiSEqC Antenna settingsSatellite search Setting system parameters Transponder selection TP set-up/searchAll new programmes are added to the existing programme list DiSEqC UFO Set-up KH signalTone burst Pre-programming is not deleted with Reset Playback Video recorder connectionRecording Software and programme list update Software and programme list update „Display info Transferring operating software Data transfer from receiver to receiverPreparation Transferring programme listsTechnical annex Technical featuresRF features Technical dataScart socket assignments AccessoriesSwitch-over VHS/S-VHS Connection arrangement Connection examplesTechnical annex DiSEqC Short technical lexiconTransponder GlossaryDiSEqC menu ServiceSatellite ZWT Technische Änderungen vorbehalten