Receiver operation, Switching the unit on

Receiver operation

In this chapter, you learn how to select TV and radio programmes using your re- ceiver, how to adjust the volume and how to programme the timer functions.

In describing the functions, it is assumed that the receiver has already been prop- erly connected up by the specialist.

Should you want to undertake the connections yourself, please read the section: “Connecting up and putting into operation“ beforehand.

Switching the unit on

	Switch the unit on via the mains switch			on the unit. The last programme slot
	selected appears (TV or radio) or it switches into standby if the unit was switched
	into standby prior to the last switch-off.
	In standby mode a horizontal line appears in the LED display “ – “.
	∙
		The	key on the remote control switches the unit between normal operation
		The
		and standby.
	∙					a the channel keys
		You can also turn the unit on using the numeric keys			...
		You can also turn the unit on using the numeric keys			...
		.
Note	On switching on via the mains switch, the resulting operating state is always the
	same as it was prior to switch-off.

Switchover between TV and radio mode

	Your receiver allows you to receive TV or radio programmes.
	After switching on, the receiver takes on either TV or radio mode (depending on the
	mode at time of switch-off).
	If the receiver is in the radio mode, the LED display and on-screen display begin
	with “r..“.

Note	∙ Press the	key on the remote control to switch between TV and radio mode.

	If you happen to have mislaid the remote control handset, you can switch the re-
	ceiver between “TV” a nd “Radio” mode by simultaneously pressing both the
	keys on the front of the unit.
Note	In the initial setup menu, a continuous on-screen display of the radio programme
	slot can be selected, independent of the TV setting (see section: “Initial settings,
	On Screen Displays“).

Selecting a programme

∙Use the numeric keys ... to select the desired programme directly. Example for a three-digit entry (“free” entry – see initial setting): Selection of programme slot 147

∙1 is entered, programme slot 1 appears

∙4 is entered, programme slot 14 appears

∙7 is entered, programme slot 147 now appears.

∙Use the keys to step through the programmes in succession.

After the programme changeover, the programme slot and programme name are superimposed on the screen for approximately three seconds.