Receiver operation
are all shifted down by one line.
Making changes
If you want to alter a stored setting, place the cursor in the appropriate line by pressing the 
key. Enter the new data in the usual manner and save the new en- tries.
To clear a timer that has been set, enter the programme slot as “00“ and save the entry.
Return to receive mode
∙Press the 
key in order to return to receive mode.
Note | If the timer is active, “rEC“is shown on the VCR LED display. |
| The programme selection keys are disabled during the recording period. If you |
| press this key the following message appears on the screen: |
If the programmed recording time has ended the following message appears:
| Press the |
| key if you want the receiver to return to normal operation, otherwise |
|
| ||
| the unit switches off after 5 minutes. | ||
| The programme number in the timer menu is set to “00“. | ||
Attention | If the timer is programmed for a recording, the unit may no longer be switched off | ||
| via the mains switch or else it must be switched on again in good time prior to the | ||
| scheduled time of recording. Both the time and the timer settings are maintained | ||
| even if the mains is disconnected. | ||
Tip | When specifying | ||
| that the entire broadcast will still be recorded even if programmes are shifted | ||
| slightly. | ||
Daily and weekly repeated switch-on
This receiver also allows an optional daily or weekly repeated
Daily repeated
∙Enter “00.00“ in the Date column, and also the
Weekly repeated switch-on
∙Enter the relevant date of the first
Example:
12.00: the timer is activated for the first time on the 12th day of the month and weekly thereafter.
Video recorder playback (VCR)
For playback from the video recorder the satellite receiver does not need to be switched on. Standby mode is sufficient to ensure the signal path is switched through from the VCR Scart socket to the TV Scart socket.
14