Receiver operation
∙Exit from the menu with key the 
key.
Radio programmes can be inserted, swapped or copied using the same method in “radio” mode.
Operation without remote control
If you happen to have mislaid the remote control handset, you can switch the re- ceiver between “TV” a nd “Radio” mode by simultaneously pressing both the 
buttons on the front of the unit.
Displaying programme overview
The unit is in normal mode (TV or radio mode).
∙Press the 
key.
The programme overview appears on the screen.
The currently selected programme is identified by <...>.
∙The 
keys can be used to 
keys allow paging in steps of 10.
∙Pressing the 
key once results in switchover to the marked programme. On exiting the programme overview with 
key, there is a switch back to the pre- vious programme.
∙Pressing the 
key twice results in switchover to the marked programme and exit from the programme overview.
∙To exit from the menu without selecting a programme press key 
.
Info menu
∙Press the 
key whilst the programme list is overlaid.
The Info menu appears with instructions for calling up the setup menus for the ini- tial setup, video and audio settings.
Exit from the menu with keys 
, 
or 
.
Stop-watch
Pressing key 
starts a
16