Kathrein UFD 400 manual Features

Features

The UFD 400 receiver is equipped with the following features:

∙250 programme channel memory

∙Satellite input frequency range from 920 MHz to 2150 MHz

∙Freely selectable oscillator frequencies, thus suitable for all feed systems

∙Radio button

∙4 event, 1-year programmable timer, with daily and weekly repeated switch-on

∙Mains switch with mains isolation

∙Power failure protection for date and time by lithium battery

∙Stereo / Dual tone switchover

∙On-screen display (OSD), 2 languages (German, English)

∙22 kHz control signal, programmable

∙DiSEqC 1.1 and tone-burst control signal

∙LNB supply voltage can be turned off

∙Connecting socket for data copying function

(read-in and read-out of programme data with the “Copy Programmer“)

∙Connector available for URS 200 external infrared sensor

∙Sort- (insert), swap- and copy function for programme slot

∙Audio frequency range 5.0 MHz to 8.8 MHz

∙Sound muting

∙Volume control and also controls for balance, tone and stereo width

∙Dynamic noise reduction (DNR) – Wegener Panda

∙Infrared remote control with command set changeover (allowing operation of two receivers in a room)

∙3 Scart sockets for TV-, VCR- and decoder connection

∙PLL modulator

∙Additional audio outputs via Cinch sockets

∙Stand by power consumption ≤ 2 Watt

∙Last-status memory

30