Receiver operation
| VOL 18 |
Note | The settings are not effective on the VCR Scart socket in order not to disturb any |
| recordings. |
The
Whilst the menu for volume adjustment is overlaid, the 
key can be used to acti- vate the following menu for balance adjustment, tone adjustment, stereo width and
VOL | 00 |
BAL | 00 |
TREB | 00 |
BASS | 00 |
WIDTH | 00 |
PSEU | OFF |
| Using the | keys or the |
| key you can select the particular menu entry and |
|
| |||
| then make changes with the | keys. | ||
Note | In the menu entry “Stereo Width" the stereo base width can be adjusted independ- | |||
| ently. |
|
|
|
| ||||
grammes, and should thus only be activated with mono reception.
If
Muting the sound
∙Press the 
key.
| The sound is muted, allowing you to make a phone call undisturbed, for example. | ||
| In the LED display the sound muting is displayed with dots | ||
|
| ||
Note | ∙ Press the |
| key again to turn the sound back on. |
| |||
Mute is not operative on the VCR Scart socket. | |||
Stereo- / Mono- / Channel changeover
TV broadcasts can be transmitted in the
∙Press the 
key. Each time you press the key, you switch the sound channel in
the order:
Channel 1 → Channel 2 → Stereo .
The selected channel is shown on the screen and in the LED display. The setting is not saved. After a change in programme the original setting takes effect again.
SAT/TV changeover
Where the satellite receiver and TV set are connected via a Scart cable, many TV sets immediately switchover signal input (on the Scart socket) to video reception when the satellite receiver is turned on um. The switching voltage of the TV Scart socket therefore needs to be switched off if you want to view a terrestrially broad- cast TV programme.
∙Press the 
key.
11