Receiver operation
Programme category selection in ADR radio mode
The digital radio programmes are divided up into different categories by the pro- gramme provider. The receiver provides the facility for calling up just those broad- casting stations in a certain chosen category.
Press the 
key .
The OSD menu appears as follows:
Using the numeric keys | select the desired category. |
The receiver switches over to the next programme in the corresponding category.
The OSD menu shows: | LED display: |
(briefly for around 3 seconds)
. A 2 .
followed by programme name appearance.
Programme selection is now possible only with the 
keys, and no longer possi- ble with the numeric keys (if, in the initial setup menu, programme selection is set to “Free entry“).
Not all of the programme categories listed in the OSD are offered by programme providers. If the chosen category does not exist, the following appears briefly:
LED display:
(briefly for around 3 seconds)
_ _ _ _ _ _ _ _
Following this, the chosen category is dis- played, however programme changeover does not take place.
Selection of a programme is not possible.
To exit from the category mode press the
and 
keys in succession
The OSD menu shows:
Programme selection again takes place in the usual manner.
16