Receiver operation
Note | If the timer becomes active, “RECORD“ is indicated on the LED display for 3 sec- |
| onds. |
| During the recording period the programme selection keys are disabled. |
If you press a key the following message appears on the screen:
If the programmed recording time has ended the following message appears:
| Press the |
| key if you want the receiver to return to normal operation, otherwise |
|
| ||
| the unit switches off after 5 minutes. | ||
| The programme number in the timer menu is set to “00“. | ||
Attention | If the timer is programmed for a recording, the unit may no longer be switched off | ||
| via the mains switch or else it must be switched on again in good time prior to the | ||
| scheduled time of recording. Both the time and the timer settings are maintained | ||
| even if the mains is disconnected. | ||
Tip | When specifying | ||
| that the entire broadcast will still be recorded even if programmes are shifted | ||
| slightly. | ||
Daily and weekly repeated switch-on
This receiver also allows an optional daily or weekly repeated
Daily repeated
∙Enter “00.00“ in the Date column, and also the
Weekly repeated switch-on
∙Enter the relevant date of the first
Example:
12.00: the timer is activated for the first time on the 12th day of the month and weekly thereafter.
Video recorder playback (VCR)
For playback from the video recorder the satellite receiver does not need to be switched on. Standby mode is sufficient to ensure the signal path is switched through from the VCR Scart socket to the TV Scart socket.
On playback from the video recorder the LED display shows:
VCR |
| |
- VCR | . |
On playback from the video recorder, you have the possibility of a brief switchover to satellite reception, in order to check the start of a broadcast, for example, without needing to switch off the video recorder.
Press the 
key for this.
If you press the key once again, each
-
14