Kathrein UFD 430 manual ADR radio menu

Page 26

Programming radio programmes

The “ADR” radio menu

It is generally not necessary to make settings in the ADR radio menu since new pro- grammes can be stored without difficulty using the automatic search run.

Naturally, you can also store ADR radio programmes manually, in the same manner as for TV and analogue radio programmes.

The "ADR radio" setup menu is essentially the same as the analogue radio setup menu.

The menu entries "Programme name" and "De-emphasis" are dropped. With digital radio programmes, the broadcasting station includes the programme name in the transmission.

One further menu entry is "Delete programme".

All the remaining settings are the same as for the analogue radio programmes.

26

Image 26
Contents Kathrein Satellite Receiver UFD Contents Controls, displays and connections Rear panel controls and connections Remote control handset keysFront panel controls and displays Safety instructions Important notes regarding operationImportant notes for siting and installation Satellite signal connection Connecting up and putting into operationConnecting up the unit Receiving system presetsAudio connection Inserting batteries into remote control handsetUHF connection Decoder connectionExternal infrared sensor Receiver operation Switching the unit onAdjusting volume, balance and tone Selecting a programmeSAT/TV changeover Muting the soundStereo- / Mono- / Channel changeover Saving settings and starting the clock Setting date and timeMaking the settings Return to receive modeSaving settings Timer settingMaking settings Meaning of the columnsDaily and weekly repeated switch-on Video recorder playback VCRDigital radio reception ADR Switching between TV and radio modeAnalogue radio programmes Programme category selection in ADR radio mode Additional functions in ADR mode Search for ADR radio programmesSwitching back to last programme swap Programme sorting inserting, swapping and copyingStop-watch Operation without remote controlDisplaying programme overview Info menuTuning in TV programmes Programming TV programmesPolarisation/Oscillator Video menuDescription of menu entries Satellite frequency Decoder menu Orbit positionVideo deviation Audio menu Audio operating modeProgramme name Audio carrier frequencyAudio de-emphasis for sound type Mono wide only Volume offsetSaving the settings Analogue radio menu Tuning in radio programmesProgramming radio programmes ADR radio menu Modulator output channel Initial settingsCalling the initial setup menu LNB supply voltage in standby OSD languageLNB supply voltage Programme selectionOscillator frequency LED brightnessADR search DiSEqC menu Changing the oscillator frequencySettings in the DiSEqC menu KHz signalTone-burst and DiSEqC-signal DiSEqC Repeat Tone burstDiSEqC UFO miniUFO micro EepromSwitching over remote control’s command set Features Specifications Temperature range Scart connector pin designationsConnectors AccessoriesConnection examples / Service note 935.2076/04.98/SKS/der Subject to alterations