Kathrein MSK 125 manual LNB Voltage and 22 KHZ CHANGE-OVER, Button LNB voltage

SAT

LNB VOLTAGE AND 22 KHZ CHANGE-OVER

The following voltages can be called up via button command:

The LNB supply voltage is available at the RF socket. To turn on or

change the LNB voltage, press the	button.
The LNB voltage

•can be switched off = 0V

•can be adjusted from 5 V to 20 V in 0.1 V intervals

•is short-circuit proof (max. amperage 600 mA from 5 to 20 V)

Button	LNB voltage
[0]		0 V
[1]		12 V
[2]		14 V
[3]		18 V
[5]		5 V
[8]		22 kHz
For checking purposes the LED right from		button is on
when the power supply is turned on.

Press the button to indicate the power consumption of the

connected LNB on the display.

The additionally connectable 22 kHz signal will superimpose the LNB voltage. It is necessary e.g. for the change-over of multi-feed systems or high band/low band LNB’s.

Command overview for LNB voltage
	Call the LNB menu
...	Select LNB voltage
or	Change LNB voltage in 0.1 V intervals
	22 kHz signal on/off
Example	Exit the LNB menu

Calling up 14 V LNB voltage:

Press the	buttons
LC display:

•LNB voltage: 14 V

•Current consumption: 150 mA

19