Woods Equipment BH6000 manual Dealer Check Lists, PRE-DELIVERY Check List DEALER’S Responsibility

Page 29

DEALER CHECK LIST

PRE-DELIVERY CHECK LIST (DEALER’S RESPONSIBILITY)

Inspect the backhoe (and sub-frame when applicable) thoroughly after assembly to be certain it is set up properly before delivering it to the customer. The check lists are a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjust- ments are made.

___ Check all bolts to be sure they are tight.

___ Check that all lubrication points have been lubricated.

___ Check that all cotter pins and safety pins are properly installed.

___ Properly attach backhoe (and sub-frame when applicable) to tractor and make all necessary adjustments.

___ Make sure all hydraulic fittings are tight and hoses are properly routed and not twisted, bent sharply, kinked, or pulled tight.

___ After pressurizing and operating all backhoe functions, stop tractor and make sure there are no leaks in the hydraulic system. Follow all safety rules when checking for leaks.

DELIVERY CHECK LIST (DEALER’S RESPONSIBILITY)

___ Present Operator's Manual (and sub-frame manual when applicable) and request that cus- tomer and all operators read it before operating

 

equipment.

___

Point out all safety features of the equipment.

 

Explain the importance and meaning of all

 

safety decals and emphasize the potential haz-

 

ards when not followed.

___

Show customer how to make adjustments.

___

Explain importance of lubrication and show

 

lubrication points to customer.

___

Show customer the safe and proper proce-

 

dures to be used when mounting, dismounting

 

and storing backhoe (and sub-frame when

 

applicable).

™

MAN0306 (Rev. 5/23/2008)

Dealer Check Lists 29

 

 

 

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Backhoe To the Dealer IntroductionTable of Contents English Metric Bucket Description Illustration BH6000 SpecificationsIntroduction Backhoe Components General InformationSafety Rules SafetyInstallation TrainingTransportation OperationStorage MaintenanceLock Safety & Instructional DecalsCrushing Hazard Operation OperationControl Handle Operation Position the MachineFill Bucket Start ExcavationDump and Return Cycle Trenching and ExcavatingThumb Operation Side Slope Trenching or ExcavatingTransport Backhoe and Tractor on a Trailer Transport and Swing Lock InstallationTransport Backhoe Tie Down Location Remove and Store BackhoePRE-OPERATION Check List Owners Responsibility Owner Service Owner ServiceRelief Valve Hydraulic Hoses and FittingsLubrication Points LubricationCleaning TroubleshootingAfter Each Use Periodically or Before Extended StorageHydraulic Valve Repair Dealer ServiceDealer Service Assemble Spool RepairDisassemble Hydraulic Cylinder Repair Adjust Control Valve LinkageGeneral Hydraulic Repair Information Boom, Dipperstick, Bucket & Stabilizer CylindersSwing Cylinder Assembly AssemblyGeneral Assembly Instructions Install StabilizerInstall Bucket Install Dipperstick CylinderInstall Hydraulic Hoses Install Backhoe BracketsStabilizer Pad Point Down Install Optional Stabilizer Street PADDealer Check List Dealer Check ListsPRE-DELIVERY Check List DEALER’S Responsibility Delivery Check List DEALER’S ResponsibilityMAN0306 Rev /23/2008 Parts Parts IndexBH6000 Main Frame Assembly Part QTY Description BH6000 Dipperstick Assembly BH6000 Boom Assembly BH6000 Cylinders BH6000 Valve Controls & HardwareBH6000 Control Valve BH6000 Hoses & Fittings Optional Stabilizer Street PAD BH6000 Hoses & Fittings Parts ListBH6000 Mechanical Thumb SAE Series Torque Chart Bolt Torque ChartAppendix Metric SeriesAbbreviations Bolt Size ChartIndex IndexWarranty Rev /23/2005 MAN0306
Top Page Image Contents