Woods Equipment BH6000 manual PRE-OPERATION Check List Owners Responsibility

Page 18

PRE-OPERATION CHECK LIST (OWNER'S RESPONSIBILITY)

The operator should perform the following check list before operating backhoe.

___ Check that backhoe is properly and securely attached to tractor.

___ Make sure all hydraulic connections are tight and all hydraulic lines and hoses are in good condition.

___ Check that there are no leaks in the hydraulic system. Before operating, all hydraulic hoses must be routed properly and are not twisted, bent sharply, kinked, pulled tight or frayed.

___ During inspection, check that all nuts and bolts are secure and clevis pins are properly cotter pinned.

___ Place all backhoe controls in neutral position before starting tractor engine.

___ Check tractor transmission oil level.

™

18 Operation

MAN0306 (Rev. 5/23/2008)

 

 

Image 18
Contents Backhoe Introduction To the DealerTable of Contents BH6000 Specifications English Metric Bucket Description IllustrationIntroduction General Information Backhoe ComponentsInstallation SafetySafety Rules TrainingOperation TransportationMaintenance StorageSafety & Instructional Decals LockCrushing Hazard Operation OperationPosition the Machine Control Handle OperationDump and Return Cycle Start ExcavationFill Bucket Trenching and ExcavatingSide Slope Trenching or Excavating Thumb OperationTransport and Swing Lock Installation TransportTransport Backhoe and Tractor on a Trailer Remove and Store Backhoe Backhoe Tie Down LocationPRE-OPERATION Check List Owners Responsibility Relief Valve Owner ServiceOwner Service Hydraulic Hoses and FittingsLubrication Lubrication PointsAfter Each Use TroubleshootingCleaning Periodically or Before Extended StorageDealer Service Dealer ServiceHydraulic Valve Repair Spool Repair DisassembleAssemble General Hydraulic Repair Information Adjust Control Valve LinkageHydraulic Cylinder Repair Boom, Dipperstick, Bucket & Stabilizer CylindersSwing Cylinder General Assembly Instructions AssemblyAssembly Install StabilizerInstall Hydraulic Hoses Install Dipperstick CylinderInstall Bucket Install Backhoe BracketsInstall Optional Stabilizer Street PAD Stabilizer Pad Point DownPRE-DELIVERY Check List DEALER’S Responsibility Dealer Check ListsDealer Check List Delivery Check List DEALER’S ResponsibilityMAN0306 Rev /23/2008 Parts Index PartsBH6000 Main Frame Assembly Part QTY Description BH6000 Dipperstick Assembly BH6000 Boom Assembly BH6000 Valve Controls & Hardware BH6000 CylindersBH6000 Control Valve BH6000 Hoses & Fittings BH6000 Hoses & Fittings Parts List Optional Stabilizer Street PADBH6000 Mechanical Thumb Appendix Bolt Torque ChartSAE Series Torque Chart Metric SeriesBolt Size Chart AbbreviationsIndex IndexWarranty Rev /23/2005 MAN0306