Extron electronic AVT 200HD manual Special Characters, Example of a Network Password Dialog Box

Page 81

4.Press the <Enter> key. The tuner checks to see if it is password protected.

If the tuner is not password protected, the System Status web page opens.

If the AVT is password protected, the network password dialog box is displayed.

Figure 46. Example of a Network Password Dialog Box

5.If an administrator or user password is required, enter it in the Password field. If desired, select the check box to have the system input your password the next time you enter your AVT IP address. Click OK.

NOTE: A User name entry is not required.

The AVT 200HD checks several possibilities, in the following order, and then responds accordingly:

If the address includes a specific file name, such as 10.13.156.10/ file_name.html, the tuner downloads that HTML page.

If there is a file in the AVT memory that is named “index.html,” the tuner downloads “index.html” as the default startup page.

If neither of the above conditions is true, the tuner downloads the factory-installed default startup page, “nortxe_index.html,” also known as the System Status page.

Special Characters

The HTML language reserves certain characters for specific functions. The AVT does not accept these characters as part of preset names, the tuner name, passwords, or locally created file names.

The following characters are invalid or not recommended: + ~ , @ = ` [ ] { } < > ’ ‘ “ ” ; : \ ? and space.

AVT 200HD Tuner • HTML Configuration and Control

75

Image 81
Contents AVT 200HD Safety Instructions English FCC Class a Notice Conventions Used in this Guide Contents Html Configuration Features About this GuideAbout the AVT 200HD Tuner AVT 200HD Tuner Introduction Application Diagram for the AVT 200HD Application DiagramInstallation Overview InstallationRear Panel Features Video Output ConnectorsComposite and S-video stacked video output connectors Analog audio output connectors Audio Output ConnectorsInput Connector Remote Configuration and Control ConnectorsDigital audio output connectors Wiring for RS-232 Control Control ConnectionsEthernet Connection Wiring the IR Link Wiring for IR ControlConnecting the AVT 200HD to the IR Link Connecting to the USB PortFound New Hardware Wizard Opening Screen AVT 200HD Tuner Installation AVT 200HD Front Panel Front Panel FeaturesNBC-4LA Hdcp CompliancePower-up and Default Cycle Screens Example Powering OnUsing the menus Menus on the LCD ScreenMenu System Overview AVT 200HD Menu Flow Menu flow diagramSelecting the signal source Channel Setup MenuScanning for channels Option Scans forScanning Cable Channels with long minor numbersSelecting tune or preset mode Output Configuration MenuSelecting a channel Saving presets Not available via the front panelSelecting the output resolution and refresh rate Recalling presetsResolution Composite Selecting the display modeSelecting the display aspect ratio Simultaneous Video OutputSelecting the closed caption service Audio Configuration MenuComm Setting Menu Flow Comm Setting MenusConfiguring the serial port and IP parameters Viewing serial port and IP settingsUnit Reset Menu Flow Unit Reset Menu Resetting from the Front PanelVolume Control Resetting from the Rear PanelExiting the Menu System Reset Modes Summary Activation Result Purpose/Notes Locking and Unlocking the Front Panel Executive Modes Exec Mode Select DisableExecutive Mode Menu Flow Using the AVT 200HD IR Remote ControlArea for Remote Signal Reception Installing batteries in the AVT 100 RemoteButtons on the AVT 200 Remote Control Buttons on the AVT 200HD Remote ControlChannel Selection buttons 0 through Selecting a Channel or Preset Using the IR Remote ControlUsing the On-screen Display OSD Locking IR Remote Control AccessIntroductory Display Channel Information Display Volume Level DisplayProgram Guide USB Port Serial PortEthernet Port Ethernet CableConnection Timeouts IP AddressEstablishing an Ethernet Connection Tuner-initiated Messages Using SIS CommandsChip Security for Parental Control Copyright message With an RS-232 connectionTuner Error Responses Error Response ReferencesUsing the Command/Response Tables for SIS Commands Special Characters Symbol Definitions for AVT 200HD Specific CommandsX1@ X1#X3@ X3# X2@ X2# X2%EX!*X@TVSL Command/Response Table for AVT 200HD SIS CommandsEX!*X@TVCH X!*X@TVCHX2%TVPR EX2%NG EX2RATEEX2&OPOL EX1TVTM EX1TVOSEX1TVPG X1% Fscc X1 TvccX1% X1 FsccX1*FSCC X1&FSCCX2*FSCC ExafmtEX* Lang Chip Setup Parental ControlX1$ VolX1$ X3@X3@*X1VCHP Chip SetupX3@*X2@VCHP X2@Other Settings $ TvstTvst ‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘ Information Requests Executive Mode Front Panel LockoutEZI ResetsSymbol Definitions for IP-specific Commands X4#X5# X5$ X6$ X6#X7# X7$X8$ X8#Command/Response Table for IP-Specific SIS Commands EX4!CPEX!CE ECN EX5@CNEX5#CT ECTEX5$CI EDHECI ECHEX4@ *X10# *X10$ PB BptX4@ *X5 BmdX9% ,X5$EX7$ ,X5$ ID EdiX7$ *X5$ *X4@ X7$ = 0EMH EX4@MHEX4@MD EMDEX7$ ,X7% ,X7 ,X7*X7& E EvtX7$ ,X7% ,X7 ,X7 EX7$ ,X7% ,X7 ,X7& EEX7$ ,X7% ,X7 ,X8 FE EvtX7$,X7%,X7, stringAccessing the AVT 200HD Configuration & Control Software Downloading and Installing the Software from the WebComputer System Requirements Software Button on the DVD Opening Screen Installing the Software from the DiscStarting the Software Communication Setup Window with Telnet TabRS232 Connection Tab Setup Tab on the Main Window Updating the Firmware Using the Configuration & Control Program Help FileExtron Firmware Loader Window for AVT 200HD Firmware Update in Progress Html Accessing the Web PagesSpecial Characters Example of a Network Password Dialog BoxSystem Status System StatusSystem Settings Configuration PagesUnit Name field IP Settings FieldsDate/Time Settings Fields Date/Time Settings FieldsTuner Settings Tuner SettingsChannel Scan section Edit Channels and Presets sectionTo hide a channel To show a hidden channelExecutive Mode Output Setup sectionPasswords Setting a passwordRemoving passwords Firmware Upgrade Firmware UpgradeChoose File Window with a Firmware File Selected Uploading Files File ManagementOther File Management Activities Adding a DirectoryUser Control Control PagesSelecting a preset Adjusting the volumeKeypad Closed Captioning Closed CaptioningText Size Text Style Text Fill Text Color ChipChip Screen Movie Rating Parental Control sectionMaximum Allowed TV Rating for Ages section TV Rating Parental Control sectionChange PIN section Signal processing SpecificationsRF video input Video output analogSync Video output digitalAudio output analog Audio output digitalGeneral Power VAC to 240 VAC, 50-60 Hz, 25 watts, internalOptional Accessories Part Numbers and AccessoriesIncluded Parts CablesRack Mounting Procedure Mounting the TunerUL Guidelines for Rack Mounting IP Addressing What is an IP Address?Choosing IP Addresses Class Name Valid Address Range Identifier ArrangementPinging for the IP Address Subnet MaskPinging to determine the Extron IP address Class Name Subnet MaskPinging to determine the web IP address Connecting as a Telnet ClientTelnet tips Connecting to the AVT Open commandGateways Subnetting a PrimerLocal and remote devices IP addresses and octetsDetermining whether devices are on the same subnet Subnet masks and octetsUnmasked octets are compared indicated by ? in figure Masked octets are not compared indicated by X in figureAtsc Frequency Table Frequency TablesPhysical Lower Edge Video Audio Upper Edge ChannelAtsc Frequency Table HRC Cable Cable Frequency TablePhysical Channel Visual Carrier Frequency MHz Cable Frequency Table Cable Frequency Table Europe, Africa, and the Middle China East USA, Canada, South America Japan Central AmericaAsia Middle East Europe