Toshiba SD-V280 One-touch Timer Recording OTR, Set TV or CA TV option to the appropriate position

Page 36

Recording (VCR)

One-touch Timer Recording (OTR)

The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording.

DVD/VCR

4

4 5 2

STOP

One-touch Timer Recording (OTR)

Preparation:

•Turn ON the TV and select the corresponding video input.

•Press DVD/VCR to select the VCR mode. (The VCR indicator will light.)

Example: One-touch Timer Recording for 30 minutes.

Load a cassette tape with the erase

1 prevention tab intact.

The VCR will automatically turn on.

2 Press SP/SLP to select the desired tape speed SP or SLP.

The tape counter and SP or SLP will appear on the screen for about 4 seconds.

00 : 00 : 00 SP

3 Set “TV” or “CA TV” option to the appropriate position 27 .

TV - VHF/UHF channels

CATV - CABLE TV channels

4 Press Number button or CH / to select the channel to be recorded.

CH 110

5 Press OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of OTR will increase recording time as shown in the chart below, up to a maximum of 5 hours.

The OTR and recording time will appear on the screen for about 4 seconds. And, “ ”will keep blinking in the display.

Press	Recording time	Press	Recording time
once	NORMAL REC	6 times	3:00
twice	0:30	7 times	4:00
3 times	1:00	8 times	5:00
4 times	1:30	9 times	NORMAL REC

5 times	2:00

OTR 0 : 30

CH 125

INDEX

To cancel OTR

Press STOP or turn off the power.

" " will appear on screen for about 4 seconds.

Note:

If you wish to watch the DVD playback during OTR or standard recording, press DVD/VCR to change to DVD mode and perform

the DVD playback 43 .

36

Image 36

Contents SD-V280 Introduction Location of the required MarkingS3125A IntroductionLightning HeatDisc Precautions Do not use the DVD/VCR when moisture condensation may occurTo obtain a clear picture Moisture condensation occurs during the following casesOn handling discs Structure of disc contents On cleaning discsOn storing discs On Video CDs Playable discsDVD VideoContents Identification of Controls Front panelRear panel Display window VCR operation StatusDVD operation Status While watching TV While operating a tapeRemote control Menu buttonBattery precautions OperationAntenna connections Antenna to DVD/VCR connectionConnections DVD/VCRConnections Set the TV/CATV menu option to TV mode Set the TV/CATV menu option to TV modeDVD/VCR to TV connection TV with single 75 ohm VHF/UHF antenna inputCatv Cable TV connections DVD/VCRSwitch SplitterIncoming Cable Converter/Descrambler ConnectionsConnecting to a TV Connecting to a TVOUT Video Component video ColorStream outputs/inputsConnecting to optional equipment Connecting to an amplifier equipped with a DTS decoderConnect either Make the following setting MPEG2 soundSetting the video channel Setting the video channelBasic setup For a push-button TV tunerSetting the language Setting the languageClock setting To set auto clock to offTo set standard time To set daylight saving time Press SET + or to select System SETUP, then press Enter Press SET + or -to select ST Andard Time , then Press EnterManual clock setting Press SET + or to select Clock SET, then press EnterPress SET + or to set the month, then press EnterTuner setting Setting channels automaticallyTV/CATV selection To ADD/DELETE channels Noise eliminationLoading and unloading a cassette tape LoadingUnloading To prevent accidental erasureCassette tape playback PlaybackRewind or forward the tape Special playback Press Counter Reset at the desired tape position Convenience functionRepeat playback Zero return function RepeatClock/counter display Video index search system Sqpb S-VHS Quasi PlaybackCounter ClockRecording a TV program Recording a TV programRecording VCR VHF/UHF/CATV Channels CatvTo stop recording To stop recording temporarilyRecording one program while watching another One-touch Timer Recording OTR One-touch Timer Recording OTRTo cancel OTR Set TV or CA TV option to the appropriate positionTimer recording Timer recordingPress VCR MENU. Select Timer REC SET, then press Enter To enter other programs, repeat throughTo confirm or cancel a program To confirm Timer programTo cancel Timer program If the programs overlap anotherStereo recording and playback Separate Audio Program SAPStereo recording and playback Separate Audio Program SAP Other functions VCRDuplicating a video tape Duplicating a video tapeConnection with second video recorder Recording a DVD/CD disc Duplicating a DVD or CD discPress Play to start playback Press REC to start recording Disc is Copy ProtectedTo start playback in the stop mode Playing a discBasic playback Basic playback DVDTo pause playback still mode To obtain a higher quality pictureTo stop playback To remove the discPlaying in fast reverse or fast forward directions Vcddvd Playing frame by frameTo resume normal playback Press REW or FWD during playback Press PlayVcddvd Playing in slow-motion VCD Resuming playback from the same locationPress Slow during playback DVD Locating a title using the top menu Locating a specific title, chapter, or trackLocating a specific chapter or track Press TOP MenuRepeat playback / Random playback Repeat playback and Random playbackVcdcd Repeating a specific segment Advanced playback DVDVCD Setting titles, chapters, or tracks in a favorite order Playing in a favorite orderZooming a picture DVD Zooming a pictureYou can magnify areas within a picture Press Zoom during normal, slow or still playbackCancel Selecting the camera angleChanging the camera angle To turn off the angle number displayCurrent subtitle setting is displayed Selecting subtitlesDVD Selecting a subtitle language To turn subtitles on or offVcddvd Selecting a playback audio setting Current audio setting is displayedSelecting a language Selecting sound channels of Video CDsVCD Selecting the sound enhancement To exit the audio enhancement selectionPress / to select the E.A.M icon, then Sound enhancement menu appearsOn-screen display operation VCD On-screen display operationPress Display Press Display againOFF CDs. Some characters may not be displayedProperly depending on the disc On-screen display turns offPress SET UP To return to the previous displayAppears On-screen display disappearsPBC Customizing the function settings Setting detailsFunction setup DVD PCMKaraoke Vocal DVD Press the Enter buttonAudio Language DVD More clearer when you pause it Function are rated according to their content.Blue Blue background Gray Gray background So that you can make a motionless pictureTo change the parental lock level Follow steps 1To change your 4-digit security code Title Stop DVD Video CDTable of languages Table of languages and their abbreviationsOthers Abbreviation LanguageBefore calling service personnel Symptoms and correctionOthers Specifications General / input / output / supplied accessoriesSupplied accessories Input/OutputLimited Ninety 90 Day Warranty Limited One 1 Year WarrantyRental Units Commercial UnitsHow to Obtain Warranty Service Important Packing and Shipping InstructionQuick set-up guide Important Safeguards SET UP menu screen in may Will lightIf you use the unit for the first time Press VCR MENU, instead of the mainAuto clock setting Screen for about 4 seconds Timer recording Basic playback DVD Fast Forward PlaybackReview Playback Still PlaybackRemote control basics Locating a chapter or trackInserting Batteries