Toshiba SD-V280 manual To obtain a higher quality picture, To pause playback still mode

DVD/VCR OPEN/CLOSE

PLAY

STOP PAUSE/STILL

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this DVD/VCR, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.

About DVD VCD CD

The	DVD VCD CD icons on the heading bar show the playable discs for the
function described under that heading.
DVD	: You can use this function with DVD video discs.
VCD	: You can use this function with VIDEO CDs.
CD	: You can use this function with audio CDs.

To pause playback (still mode)

Press PAUSE/STILL during playback.

To resume normal playback, press the PLAY button.

•The sound is muted during still mode.

To stop playback

Press STOP.

Playing a Disc while the VCR section is recording or standing by for timer recording

1)Start to record.

Follow step 1~5 on page 34.

•If the DVD/VCR is standing by for recording, turn on the DVD/VCR.

2)Press DVD/VCR to select DVD mode. The DVD indicator will light.

3)Play a disc.

Follow step 3 ~ step 5 on page 42.

•Press PLAY if the DVD/VCR does not start to play a disc automatically.

4)Stop to play

Press STOP to stop play back a disc.

Basic playback (DVD)

To remove the disc

Press OPEN/CLOSE.

Remove the disc after the disc tray opens completely.

Be sure to press the OPEN/CLOSE button to close the disc tray after you remove the disc.

About the screen saver

If you pause a picture of a DVD video disc and leave it still for a long while, the screen saver of the DVD/VCR player automatically appears (when “Screen Saver” is set to “On” 61 ). To turn off the screen saver, press the PLAY button.

Notes:

•Do not move the DVD/VCR during playback. Doing so may damage the disc.

•Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the DVD/VCR to malfunction.

•Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD/VCR to malfunction.

•In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the STOP button on your remote control once the movie is completed.

•During the DVD playback if you change the operating mode from DVD to VCR, the DVD will continue to play back the disc and stop after about 5 minutes.

43