Toshiba SD-V280 manual Connect either Make the following setting, MPEG2 sound

Warning

•When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Audio Out Select” to “PCM” from the on-

screen displays 56 58 . Otherwise, high volume sound may damage your hearing as well as the speakers.

•When playing DTS-encoded discs (DVD/VCR), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the DVD/VCR are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR.

Connecting to an amplifier equipped with an MPEG2 audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

Amplifier equipped with an

MPEG2 audio decoder

To COAXIAL	To OPTICAL
type digital	type digital
audio input	audio input
	Optical digital cable
	75 Ω coaxial cable

		DVD OUT			DVD, VCR OUT	LINE IN1	UHF/VHF
DIGITALAUDIO		ANALOG AUDIO	S	COMPONENT			(FROMINANT)
OPTICAL	COAXIAL	L		Y	VIDEO	VIDEO
		R
				P	L	L
					AUDIO	AUDIO	OUT
				P	R	R	(TO TV)
						3	4
				7230007448			CH

Connect either.

•Use DVD video discs encoded via the MPEG2 recording system.

•Make the following setting.

On-screen display	Select:	Page
“Audio Out Select”	“Bitstream”	56
		58
Recording system	MPEG	52

Connections

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Amplifier equipped with a digital audio input

To COAXIAL	To OPTICAL
type digital	type digital
audio input	audio input
	Optical digital cable
	75 Ω coaxial cable

		DVD OUT			DVD, VCR OUT	LINE IN1	UHF/VHF
DIGITALAUDIO		ANALOG AUDIO	S	COMPONENT			(FROMINANT)
OPTICAL	COAXIAL	L		Y	VIDEO	VIDEO
		R
				P	L	L
					AUDIO	AUDIO	OUT
				P	R	R	(TO TV)
						3	4
				7230007448			CH

Connect either.

• Make the following setting.

On-screen display	Select:	Page
“Audio Out Select”	“PCM”	56
		58

Notes:

•DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR.

•Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the “OPTICAL” or “COAXIAL” input of a Receiver or Processor.

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

•Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier power on, the speakers may be damaged.

21