Toshiba SD-V280 manual Tuner setting, TV/CATV selection, Setting channels automatically

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

1-2

1, 3

1, 4

TV/CATV selection

Preparation:

•Turn ON the TV and set to the video input mode.

•Press DVD/VCR to select the VCR mode. (The VCR indicator will light.)

1 Press VCR MENU. Press SET + or –to select “CH SET UP”, then press ENTER.

	MENU
	TIMER REC SET	ON	OFF
	AUTO REPEAT
	SAP	ON	OFF
	CH SET UP
	SYSTEM SET UP
〈+/-/ENTER/MENU〉

2	Press SET + or – to select “TV/CATV”.
		CH SET UP
		TV CATV
		AUTO CH MEMORY
		ADD/DELETE
3		〈+/-/ENTER/MENU〉
	Press ENTER to select the TV or CATV mode.
	The arrow indicates the selected mode.
		CH SET UP
		TV CATV
		AUTO CH MEMORY
		ADD/DELETE
TV	- VHF/UHF channels
CATV - CABLE TV channels		〈+/-/ENTER/MENU〉

4 Press VCR MENU until the menu screen is cleared.

Setting channels automatically

1 Repeat left step 1 and press SET + or – to select “AUT O CH MEMORY”.

CH SET UP

TV CATV

AUTO CH MEMORY

ADD/DELETE

〈+/— /ENTER/MENU〉

2 Press ENTER.

Auto tuning will begin. The channel display will count up and when fin- ished, the screen returns to normal.

CH 002

Basic setup

Note:

You can’t select “CH SET UP” if you set the channel to “L1” or “L2”.

27