Toshiba SD-V280 manual Timer recording

Page 74

Timer recording

1 Press VCR MENU.

2 Press SET + or – to select one of the program line, then

3 Press SET + or – to select the date, then press ENTER.

4 Set the start time, end time, channel and tape speed as

5 To enter other programs, repeat step 2 through 4.

• To return to the normal screen, press VCR

MENU twice.

6 Press TIMER REC. The timer symbol () will appear on the display and the VCR stands by for recording.

At the same time, VCR mode will change to DVD mode automatically.You can use DVD even if the VCR is in the Timer recording mode.

If you do not use the DVD, turn the power off.

One-touch Timer Recording (OTR)

1 Load a cassette tape with the erase prevention tab intact.

The VCR will automatically turn on.

Press SP/SLP to select the desired tape speed SP or

2 SLP.

The tape counter and SP or SLP will appear on the screen for about 4 seconds.

3 Set “TV” or “CATV” option to the appropriate position. TV - VHF/UHF channels CATV - CABLE TV channels

4 Press Number button or CH / to select the channel to be recorded.

5 Press OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of OTR will increase recording time as shown in the chart below,

up to a maximum of 5 hours.

The OTR and recording time will appear on the screen for about 4 seconds. And, “ ”will keep blinking in the display.

To cancel OTR

Press STOP or turn off the power.

" " will appear on screen for about 4 seconds.

Note:

If you wish to watch the DVD playback during OTR or standard recording, press DVD/VCR to change to DVD mode and perform the DVD playback.

2B01607AE Q Sheet

6

17/7/2002, 9:32

Image 74

Contents SD-V280 Introduction Location of the required MarkingS3125A IntroductionLightning HeatDisc To obtain a clear picture PrecautionsDo not use the DVD/VCR when moisture condensation may occur Moisture condensation occurs during the following casesOn storing discs On handling discs Structure of disc contentsOn cleaning discs DVD On Video CDsPlayable discs VideoContents Rear panel Identification of ControlsFront panel DVD operation Status Display windowVCR operation Status While watching TV While operating a tapeRemote control Menu buttonBattery precautions OperationConnections Antenna connectionsAntenna to DVD/VCR connection DVD/VCRDVD/VCR to TV connection Connections Set the TV/CATV menu option to TV modeSet the TV/CATV menu option to TV mode TV with single 75 ohm VHF/UHF antenna inputCatv Cable TV connections DVD/VCRIncoming Cable Converter/Descrambler SwitchSplitter ConnectionsOUT Connecting to a TVConnecting to a TV Video Component video ColorStream outputs/inputsConnecting to optional equipment Connecting to an amplifier equipped with a DTS decoderConnect either Make the following setting MPEG2 soundBasic setup Setting the video channelSetting the video channel For a push-button TV tunerSetting the language Setting the languageClock setting To set auto clock to offUP, then press Enter To set standard time To set daylight saving timePress SET + or to select System SET Press SET + or -to select ST Andard Time , then Press EnterPress SET + or to set the month, then press Manual clock settingPress SET + or to select Clock SET, then press Enter EnterTV/CATV selection Tuner settingSetting channels automatically To ADD/DELETE channels Noise eliminationUnloading Loading and unloading a cassette tapeLoading To prevent accidental erasureRewind or forward the tape Cassette tape playbackPlayback Special playback Repeat playback Zero return function Press Counter Reset at the desired tape positionConvenience function RepeatCounter Clock/counter display Video index search systemSqpb S-VHS Quasi Playback ClockRecording VCR Recording a TV programRecording a TV program VHF/UHF/CATV Channels CatvRecording one program while watching another To stop recordingTo stop recording temporarily To cancel OTR One-touch Timer Recording OTROne-touch Timer Recording OTR Set TV or CA TV option to the appropriate positionPress VCR MENU. Select Timer REC SET, then press Enter Timer recordingTimer recording To enter other programs, repeat throughTo cancel Timer program To confirm or cancel a programTo confirm Timer program If the programs overlap anotherStereo recording and playback Separate Audio Program SAP Stereo recording and playbackSeparate Audio Program SAP Other functions VCRConnection with second video recorder Duplicating a video tapeDuplicating a video tape Press Play to start playback Press REC to start recording Recording a DVD/CD discDuplicating a DVD or CD disc Disc is Copy ProtectedBasic playback To start playback in the stop modePlaying a disc Basic playback DVDTo stop playback To pause playback still modeTo obtain a higher quality picture To remove the discTo resume normal playback Playing in fast reverse or fast forward directionsVcddvd Playing frame by frame Press REW or FWD during playback Press PlayPress Slow during playback Vcddvd Playing in slow-motionVCD Resuming playback from the same location Locating a specific chapter or track DVD Locating a title using the top menuLocating a specific title, chapter, or track Press TOP MenuVcdcd Repeating a specific segment Repeat playback / Random playbackRepeat playback and Random playback Advanced playback DVDVCD Setting titles, chapters, or tracks in a favorite order Playing in a favorite orderYou can magnify areas within a picture Zooming a pictureDVD Zooming a picture Press Zoom during normal, slow or still playbackChanging the camera angle CancelSelecting the camera angle To turn off the angle number displayDVD Selecting a subtitle language Current subtitle setting is displayedSelecting subtitles To turn subtitles on or offSelecting a language Vcddvd Selecting a playback audio settingCurrent audio setting is displayed Selecting sound channels of Video CDsPress / to select the E.A.M icon, then VCD Selecting the sound enhancementTo exit the audio enhancement selection Sound enhancement menu appearsPress Display On-screen display operationVCD On-screen display operation Press Display againProperly depending on the disc OFFCDs. Some characters may not be displayed On-screen display turns offAppears Press SET UPTo return to the previous display On-screen display disappearsPBC Function setup DVD Customizing the function settingsSetting details PCMKaraoke Vocal DVD Press the Enter buttonAudio Language DVD Blue Blue background Gray Gray background More clearer when you pause itFunction are rated according to their content. So that you can make a motionless pictureTo change your 4-digit security code To change the parental lock levelFollow steps 1 Title Stop DVD Video CDOthers Table of languagesTable of languages and their abbreviations Abbreviation LanguageOthers Before calling service personnelSymptoms and correction Supplied accessories SpecificationsGeneral / input / output / supplied accessories Input/OutputRental Units Limited Ninety 90 Day WarrantyLimited One 1 Year Warranty Commercial UnitsHow to Obtain Warranty Service Important Packing and Shipping InstructionQuick set-up guide Important Safeguards If you use the unit for the first time SET UP menu screen in mayWill light Press VCR MENU, instead of the mainAuto clock setting Screen for about 4 seconds Timer recording Review Playback Basic playback DVDFast Forward Playback Still PlaybackInserting Batteries Remote control basicsLocating a chapter or track