Toshiba SD-V280 manual Duplicating a video tape, Connection with second video recorder

Other functions (VCR)

Duplicating a video tape

If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.

DVD/VCR

2

4 1

5

Duplicating a video tape

Preparation:

•Turn ON the TV and select the corresponding video input.

•Press DVD/VCR to select the VCR mode. (The VCR indicator will light.)

•Load a cassette tape with the erase prevention tab intact.

•Load a previously recorded tape into the playback VCR or Camcorder.

1 Press SP/SLP to select the desired tape speed SP or SLP.

It is recommended that you set the

Speed to the SP mode on the

recording VCR for best results.

2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.

"L1" or "L2" will appear in the display.

S P PM

Connection with second video recorder

Playback VCR

To VIDEO OUT To AUDIO (R) OUT To AUDIO (L) OUT

AUDIO/VIDEO Cord (supplied)

Recording VCR

To VIDEO IN To AUDIO (R) IN

To AUDIO (L) IN

L1: on the rear panel

L2: on the front panel

3 Press PLAY on the playback VCR or Camcorder.

4 Press REC on the recording VCR.

The duplicating process begins.

5 Press STOP after duplicating a video tape.

Connection with Camcorder

Playback Camcorder

To AV Jack

Recording VCR

	To AUDIO (R) IN
	To AUDIO (L) IN
To VIDEO IN	AUDIO/VIDEO Cord (not supplied)

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.

40