Toshiba SD-V393SU manual Use DVD video discs, Encoded via the MPEG2, Recording system

Page 21

Warning

When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog stereo jacks. To avoid possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the DVD/VCR are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) wires dangling.) To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR.

Connecting to an amplifier equipped with an MPEG2 audio decoder

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs encorded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

 

• Use DVD video discs

 

encoded via the MPEG2

Amplifier equipped with an

recording system.

MPEG2 audio decoder

 

To COAXIAL

 

type digital

To COAXIAL DIGITAL

audio input

AUDIO OUT

 

75 Ω coaxial cable (not supplied)

Connections

Connecting to an amplifier equipped with a digital audio input

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers).

Amplifier equipped with a

 

digital audio input

 

To COAXIAL

 

type digital

To COAXIAL DIGITAL

audio input

AUDIO OUT

 

75 Ω coaxial cable (not supplied)

Notes:

•DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR.

•Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD/VCR to the “COAXIAL” input of a Receiver or Processor.

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

•Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier power on, the speakers may be damaged.

21

2H20101A (E)p18-25

21

2/10/05, 7:32 PM

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Toshiba Corporation SD-V393SULocation of the required Marking IntroductionIntroduction S3125AS2898A NEC SectionDisc HeatDo not use the DVD/VCR when moisture condensation may occur PrecautionsWait Moisture condensation occurs during the following casesOn handling discs Structure of disc contents On cleaning discsOn storing discs About this ownerÕs manual On Video CDsPlayable discs Contents Identification of controls Front panelRear panel VCR operation status Display windowDVD/CD/VCD operation status While watching TV While operating a tapeMenu button RemotecontrolOperation Inserting batteriesAntenna to DVD/VCR connection Antenna connectionsConnections Combination VHF/UHF Antenna with 75 ohm Coaxial CableTo the Òtvó mode Connections Set the TV/CABLE menu option to Òtvó modeSet the TV/CABLE menu option to Òtvó mode DVD/VCR to TV connectionIncoming Cable Cable TV connectionsConverter DescramblerSplitter SwitchIncoming Cable Converter/Descrambler ConnectionsConnecting to a TV Connecting to a TVSignal flow Connect the DVD/VCR to your TVTo wall outlet If you connect the DVD/VCR to To switch the scan mode between ColorStreamYour TV with the DVD OUT jacks Select the corresponding videoConnecting to an amplifier equipped with a DTS decoder Connecting to optional equipmentUse DVD video discs or Audio CDs encoded viaUse DVD video discs Encoded via the MPEG2Recording system Setting the video channel Setting the video channelBasic setup When a TV is connected with the 75 ohm coaxial cable onlySetting the language Setting the languageClock setting Auto Clock adjustmentTo set Auto Clock to off To set Standard Time To set Daylight Saving Time Press SET + or Ð to select your time zone, then press EnterGMT Greenwich Mean Time Example Setting the clock to 830 AM March, 26 SAT Manual clock settingTuner setting Setting channels automaticallyTV/CABLE selection To ADD/DELETE channels Noise elimination Press Enter until ADD appears on the screenTo delete channels Loading Loading and unloading a cassette tapeUnloading To prevent accidental erasureCassette tape playback PlaybackRewind or forward the tape Special playback Repeat playback Zero return function Convenience functionClock/counter display Video index search system DVD mode VCR modeSqpb S-VHS Quasi Playback Recording an Index markRecording a TV program Recording a TV programRecording VCR To stop recording To stop recording temporarilyRecording one program while watching another One-touch Timer Recording OTR One-touch Timer Recording OTRTimer recording Timer recordingPress SET + or Ð to select the date, then press To enter other programs, repeat throughTo confirm Timer program To confirm or cancel a programTo cancel Timer program If the programs overlap anotherOther functions VCR Stereo recording and playback Second Audio Program SAPOutput selection Listening to SAPDuplicating a video tape Duplicating a video tapeConnection with second VCR Press REC/OTR on the recording VCRRecording a DVD/CD disc Duplicating a DVD or CD discOther functions VCR Press Stop if you finish recording Playing a disc To start playback in the stop modeVCD Basic playback Basic playback DVDTo obtain a higher quality picture To pause playback still modeTo remove the disc Press OPEN/CLOSE Screen saver functionVcddvd Playing frame by frame VCD Playing in fast reverse or fast forward directionsVcddvd Playing in slow-motion VCD Locating a chapter or trackVCD Zooming Zooming/Locating desired sceneVCD Locating desired scene Advanced playback DVDMarking desired scenes To cancel the MarkerVcddvd Marking the scenes Vcddvd Returning to the scenesRepeat playback/A-B Repeat playback VCD Repeat playbackVCD A-B Repeat playback Program playback/Random playback Vcdcd Program playbackVCD Random playback DVD Changing angles Changing angles/Title selection/DVD menuDVD Title selection DVD DVD menuChanging soundtrack language Setting surround sound VCD Setting surround soundDVD Changing soundtrack language Subtitles/To turn off the PBC DVD SubtitlesTo turn off the PBC MP3/WMA/JPEG CD information MP3/WMA/JPEG operationLimitations on MP3/WMA/JPEG CD playback Limitations on display5Press Stop to end playback CD MP3/WMA CD playbackAbout file menu AdvancedCD Slide show playback CD Jpeg CD playbackCustomizing the function settings Setting procedureFunction setup DVD Setting details English, Francais, Espanol Menu, Subtitle, AudioOriginal Audio Off SubtitleJpeg Interval Picture ModeOff SecondsIf you forget the password Parental control settingSetup Each setup will be retained in the memory even if you turnLevel that you have set Temporary disabling of rating level by DVD discWord was correct Disc is ejectedLanguage code list Troubleshooting Symptoms SolutionsOthers Supplied accessories SpecificationsGeneral Input/OutputLimited Ninety 90 Day Warranty Limited warrantyRental Units Commercial UnitsOthers How to Obtain Warranty ServicesMemo Memo 2H20101A Ep64-BACK 10/05, 735 PM
Top Page Image Contents