Toshiba SD-V393SU manual To ADD/DELETE channels Noise elimination, To delete channels

Basic setup

Tuner setting (continued)

VCR MENU

ENTER

SET +/–

0–9

To ADD/DELETE channels Noise elimination

1 Repeat the step 1 on page 27. Then￿￿￿￿￿￿￿￿press SET + or Ð to select the ÒADD/DELETEÓ and￿￿￿￿press￿￿￿￿￿￿￿￿ENTER.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2To Add or Delete desired channels

1)Press Direct channel selection buttons (0Ð9) or SET +/Ð to select a channel number you want to add or delete.

2)To add channels

Press ENTER until “ADD” appears on the screen.

To delete channels

Press ENTER until “DELETE” appears on the screen. The channel number will blink

3)Repeat 1) to 2) to add or delete￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿other channel￿￿.￿￿￿

When you don't want to receive a weak signal broadcast, a Blue back screen can be obtained by selecting the NO NOISE BACKGROUND “ON”. When the unit is shipped from the fac- tory, the NO NOISE BACKGROUND is set to “ON”.

1Repeat the steps 1~2 on page 26￿￿￿￿and￿￿￿￿￿press SET￿￿

+or Ð to select ÒNO NOISE BACKGROUNDÓ￿￿￿￿￿￿￿￿￿￿￿.

￿￿￿￿￿

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

2Press ENTER to select ÒONÓ or ÒOFFÓ￿￿￿￿￿￿￿￿￿￿position.￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

3Press VCR MENU until the menu screen is cleared.

3Press VCR MENU until the menu screen is cleared.

28

2H20101A (E)p26-31 28 2/10/05, 7:32 PM