Toshiba SD-V393SU manual Duplicating a video tape, Connection with second VCR

Other functions (VCR)

Duplicating a video tape

If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.

VCR DVD INPUT SELECT

STOP

SP/SLP

REC/OTR

Duplicating a video tape

Preparation:

•Turn ON the TV and select the corresponding video input.

•Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.)

•Load a cassette tape with the erase prevention tab intact.

•Load a previously recorded tape into the playback VCR or Camcorder.

1Press SP/SLP to select the desired tape speed SP or SLP.

It is recommended that you set the tape speed to the SP mode on the recording VCR for best results.

2Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.

“L1” or “L2” will appear in the display.

L1: on the rear panel

L2: on the front panel

Connection with second VCR

Playback VCR

To VIDEO OUT To AUDIO (R) OUT To AUDIO (L) OUT

AUDIO/VIDEO cable (supplied)

Recording VCR

To VIDEO IN	To AUDIO (R) IN
	To AUDIO (L) IN

Connection with Camcorder

3 Press PLAY on the playback VCR or Camcorder.			Playback Camcorder
			To AV Jack
4	Press REC/OTR on the recording VCR.		Recording VCR
	The duplicating process begins.
			To AUDIO (R) IN
			To AUDIO (L) IN
5		To VIDEO IN	AUDIO/VIDEO cable (not supplied)
	Press STOP after duplicating a video tape.	For duplicating a previously recorded tape from a
		camcorder, follow the camcorder manufacturer’s

instructions. A typical camcorder dubbing hookup is shown above.

40

2H20101A (E)p38-41 40 2/10/05, 7:33 PM