Toshiba SD-V393SU manual Tuner setting, TV/CABLE selection, Setting channels automatically

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.

VCR DVD VCR MENU

ENTER

SET +/–

TV/CABLE selection

Preparation:

•Turn ON the TV and select to the corresponding video input.

•Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.)

1 Press VCR MENU. Press SET + or Ð to select ÒCH SETUPÓ, then press ENTER￿￿￿￿.￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2Press SET + or Ð to select ÒTV/CABLEÓ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿.

		￿￿￿￿￿￿￿￿￿￿￿￿￿￿
Press ENTER to select the TV or CABLE
3 mode.		￿￿￿￿￿￿￿￿￿￿
	The arrow indicates￿￿the￿￿￿￿selected￿￿￿￿mode.
TV	- VHF/UHF channels
CABLE	- Cable TV channels	￿￿￿￿￿￿￿￿￿￿￿￿￿￿

4Press VCR MENU until the menu screen is cleared.

Note:

You can’t select “CH SETUP” if you set the channel to “L1” or “L2”.

2H20101A (E)p26-31 27

Setting channels automatically

￿￿￿￿￿￿￿￿￿￿	￿￿￿￿	Basic
1 select ÒAUTO CH MEMORYÓ.￿￿￿￿￿￿
Repeat left step 1 and press SET + or Ð to
		setup

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

2 Press ENTER.

Auto tuning will begin. The channel dis- play will count up and when finished,￿￿￿￿￿

the screen returns to normal.

27

2/10/05, 7:32 PM