Toshiba SD-V393SU manual Clock setting, To set Auto Clock to off, Auto Clock adjustment

AUTO CLOCK setting

Basic setup

Clock setting

The AUTO CLOCK function will automatically set the built-in clock (Month, Day, Year and Time) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off. The DVD/VCR searches for a station in your area containing the necessary AUTO CLOCK setting signals. Once received, it will take approximately 4 minutes for the clock to set itself automatically.

POWER VCR DVD

VCR MENU

ENTER

SET +/–

CALL

To set AUTO CLOCK to off

When shipped from factory the AUTO CLOCK is set to “ON”.

Preparation:			But if you do not want AUTO CLOCK setting:
• Turn ON the TV and select the corresponding video input.			1	Press VCR MENU.			￿￿￿￿	￿￿￿￿￿￿￿￿
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
	Connect the Antenna or Cable system.
1						￿￿￿￿￿￿￿￿￿￿￿
	• If you use a cable box, turn it on.				￿￿￿￿￿￿￿￿￿￿￿￿￿￿
2 Plug the AC power cord to the AC outlet.				Press SET + or Ð to select ÒSYSTEM SETUPÓ,
	Make sure the DVD/VCR is turned off.
3			2	then press ENTER.		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	• If you press POWER, the Auto Clock
	set is not programmed.
4	Wait at least three minutes and press POWER.				￿￿￿￿￿￿￿￿￿￿￿￿￿￿
			3	Press SET + or Ð to select ÒAUTO CLOCKÓ.
	Press CALL to check the clock setting on				￿		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
5 the on screen display.
	8 : 47AM MON	CH 125
	STEREO SAP				￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	00 : 00 : 00 SP		4 Press ENTER to select ÒOFFÓ￿.				￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿
	If the clock is not set, check the antenna
6 condition. The AUTO CLOCK may not
	function properly if the reception condition					￿￿￿		￿￿￿￿￿￿￿￿￿￿
	is not good.
					￿￿￿￿￿￿￿￿￿￿￿￿￿￿
AUTO CLOCK adjustment
				Press VCR MENU repeatedly to return to the
The auto clock adjustment will be updated at 6:00			5 normal screen.
AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.				• When the AUTO CLOCK is set to
				“OFF”, the AUTO CLOCK adjust-
• If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be				ment does not function.
left on.				• Set the clock manually				26 .
• The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.

24

2H20101A (E)p18-25 24 2/10/05, 7:32 PM