Toshiba SD-V393SU manual Zooming/Locating desired scene, VCD Zooming, VCD Locating desired scene

• If you input a wrong number, press

CLEAR.

• Refer to the package supplied with the disc to check the numbers.

4 Press ENTER. Playback starts.

• When you change the title, playback starts from Chapter 1

of the selected title.

• Some discs may not work in the

above operation.

Advanced playback (DVD)

Zooming/Locating desired scene

ZOOM

C/D/B/A

ENTER

CLEAR

DISPLAY 0–9

SEARCH

DVD

VCD Zooming

CD

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

1Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0).

1

2Press C/D/B/A to view a different part of the frame.

You may move the frame from the centre position to UP, DOWN, LEFT or RIGHT direction.

3 In the zoom mode press ZOOM repeatedly to return to a 1:1 view ( Off).

Notes:

•You can select the Pause, Slow or Search playback in the zoom mode.

•Some discs may not respond to zoom feature.

DVD

VCD Locating desired scene

CD ￿￿￿￿ ￿ ￿￿￿￿ ￿

Use the title, chapter and time recorded￿￿￿￿￿￿on￿￿￿the￿￿￿￿￿DVD disc to locate the desired point to play back. In the case￿of VCD/CD discs, time and track are used to￿￿￿￿￿￿￿locate￿ the desired point to play back. To check the title, chapter￿￿￿￿￿￿￿￿and time,￿￿ press DISPLAY.

1 Press SEARCH during playback or stop mode. 3 Press Number buttons (0Ð9)￿to￿￿￿￿￿￿change￿￿￿￿ the number.

• “Time”￿￿￿￿ only￿￿￿￿￿￿works￿￿￿￿￿￿￿in￿playback￿ or resume￿￿￿￿￿￿￿￿ stop mode.

2 Press C or D to select the ÒTimeÓ, ÒTitleÓ or ÒChapterÓ.

Note:

In case of the Video-CD playback with PBC, the SEARCH does not work. To turn off PBC 51 .

Advanced playback (DVD)

45

2H20101A (E)p42-45 45 11/2/05, 10:26