Recording (VCR)
One-touch
One-touchVCR DVD
The | CH +/– |
convenient way to make a timed recording.
STOP
REC/OTR
SP/SLP
One-touch Timer Recording (OTR)
Preparation:
•Turn ON the TV and select to the corresponding video input.
•Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.)
Example:
1Load a cassette tape with the erase prevention tab intact.
The VCR will automatically turn on.
2Press SP/SLP to select the desired tape speed SP or SLP.
The tape counter and “SP” or “SLP” will appear on the screen for about 4 seconds.
3Set ÒTVÓ or ÒCABLEÓ option to the appropriate position 27 .
TV | - VHF/UHF channels |
CABLE | - Cable TV channels |
|
|
36
4Press Direct channel selection buttons (0Ð9)or
CH +/Ð to select the channel to be recorded.
5Press REC/OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up
to a maximum of 6 hours.
|
|
| The OTR and recording time will | ||||||
|
|
| appear on the screen for about 4 | ||||||
|
|
| seconds. And, “ | ” will appear on | |||||
|
|
| the display. |
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
Press | Recording time | Press | Recording time |
|
|
| |||
once | NORMAL REC | 6 times |
| 3:00 |
|
|
| ||
twice | 0:30 | 7 times |
| 4:00 |
|
|
| ||
3 times | 1:00 | 8 times |
| 5:00 |
| ||||
4 times | 1:30 | 9 times | 6:00 |
| |||||
5 times | 2:00 | 10 times | NORMAL REC |
|
| ||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To cancel OTR
Press STOP or turn off the power.
“ 
” will appear on screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard recording, press VCR DVD selector to change to DVD mode and perform the DVD playback 42 .
2H20101A | 36 | 2/10/05, 7:33 PM |