Adding channels to the TV’s memory

Setting up your TV

When you press CH or , your TV will stop only on the channels you have programmed into the TV’s channel memory. Follow the steps below to program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.

To add channels automatically:

1.Press TV to select the TV mode.

2.Press MENU, then press or to display the SETUP menu.

3.Press ▲ or ▼ until the TV/CABLE

selection is highlighted.	S E T U P
4. Press or to highlight either	S E T U P
4. Press or to highlight either	L A N G U A G E	E N G L I S H
TV or CABLE, depending on	CLOCK SET
which you use.	TV / CABLE	TV /	CABLE
	CH PROGRAM
	ADD / ERASE
If you use an antenna, choose TV.
If you use cable, choose CABLE.	SELECT	ADJUST
If you use cable, choose CABLE.

5.Press ▼ until the CH PROGRAM selection is highlighted.

6.Press to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message “PROGRAMMING NOW PLEASE WAIT” appears.

7.When channel programming is complete, the message “COMPLETED” appears.

8.Press CH or to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.	Press TV to select the TV mode.
2.	Press MENU, then press or to display the SETUP menu.
3.	Press ▲ or ▼ to highlight ADD/ERASE.
4.	Press to display the ADD/ERASE
4.	Press to display the ADD/ERASE
	menu.
5.	Select the desired channel to be
	memorized or deleted using ▲ or
	▼. Press or to select either
	ADD or ERASE.
6.	Repeat step 5 for other channels
	you want to add or erase, then
	press ENTER.
7.	Press EXIT to return to the normal screen.

To add a digital channel you are watching:

Select a channel you want to add. Press ▲ or ▼ to select ADDING CHANNEL in step 4 above, then press .

To erase all channels from the channel memory:

Press ▲ or ▼ to select CLEAR ALL in step 4 above, then press .

All channels are erased from the channel memory. (You can still use the Channel Numbers on the remote control to tune a channel.)

Changing channels

To change to the next programmed channel:

Press Channel ▲ / ▼ on the TV or CH / on the remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9) on the remote control.

For example, to select channel 125, press 1, 2, 5.

To change to a specific digital channel:

Press the first 3 digits, then press 100, followed by the remaining 3 digits. For example, to select channel 015-001, press 0, 1, 5, 100, 0, 0, 1.

INPUT DISPLAY

Channel

Numbers

Channel /

Menu/Enter

Exit

CT-885

In addition to cycling through your pro- grammed channels, the Channel or buttons will also cycle through the video input sources (page 31) in the order illustrated below.

Note:

Digital cable channels may be represented by channel numbers that include a “dash” (e.g., 85–002.) These digital channel numbers may not match the numbers in the channel line-up provided by your cable company. This is not a malfunction.

Note:

If the remote control does not operate your TV, press the “TV” button on the remote control and try again.

3X70701A_En_p18-25

3/7/06, 6:24 PM