Picture/Audio adjustments in PC mode
There are a number of picture settings you can adjust to optimize the performance of the TV in PC mode.
|
|
|
|
|
| ||||
PICTURE Menu |
| AUDIO Menu |
| ||||||
|
|
|
|
|
|
|
| ||
|
|
|
| ||||||
|
|
|
| ||||||
|
|
|
| ||||||
Example: Adjust the contrast.
1.Press TV to select the TV mode.
2.During PC mode, press MENU, then press 
or 
to display the PICTURE menu.
3.Press ▲ or ▼ to highlight CONTRAST.
4.Press 
or 
to adjust the contrast level.
5.Press EXIT to return to normal viewing.
TV
Menu/Enter
Exit
Notes:
•If you wish to change the
•If no buttons are pressed for more than approx. 60 seconds, the PC Monitor Menu screen will return to normal Monitor screen automatically.
•The PC Monitor Menu settings are not effective for normal TV mode or external input modes.
Introduction
Connecting your TV
PICTURE menu settings:
BRIGHTNESS: To adjust the brightness of PC Monitor screen.
CONTRAST: To adjust the contrast of PC Monitor screen.
HOR POSITION: To adjust the horizontal position of the image on the PC Monitor screen. Each video standard will require a different value for this setting.
VER POSITION: To adjust the vertical position of the image on the PC Monitor screen. Each video standard will re- quire a different value for this setting.
PHASE:This must be adjusted after the frequency has been set to optimize picture quality.
CLOCK:To minimize any vertical bars or stripes visible on the screen background.
RED/GREEN/BLUE: To adjust the color temperature of the PC Monitor screen.
WVGA INPUT: Set to ON, when you select the WVGA mode on the PC.
WXGA INPUT: Set to ON, when you select the WXGA mode on the PC.
AUDIO menu settings:
BASS/STREBLE/BALANCE: To adjust the sound quality of PC
| mode. |
STABLE SOUND: | To turn on or off the |
| StableSound® feature in PC |
| mode. |
WOW SRS 3D: | To turn on or off the surround |
| effect in PC mode. |
WOW FOCUS: | To turn on or off the vocal |
| emphasis effect in PC mode. |
WOW TruBass: | To select your desired bass |
| expansion level (HIGH, LOW or |
| OFF) in PC mode. |
Setting up your TV
Using the
Resetting your picture/audio adjustments in PC mode
The RESET function returns your picture quality adjustments to the
following factory settings: |
|
| |
PICTURE menu |
| AUDIO menu |
|
Brightness | center (25) | Bass | center (25) |
Contrast | center (50) | Treble | center (25) |
Red | center (25) | Balance | center (0) |
Green | center (25) |
|
|
Blue | center (25) |
|
|
To reset your picture/audio adjustments:
1.Press TV to select the TV mode.
2.Press MENU during PC mode.
3.Press 2 or 3 to select the desired menu.
4.Press ▲ or ▼ to highlight RESET, and then press 
.
45
Note:
If the remote control does not operate your TV, press the “TV” button on the remote control and try again.
TV’s Features
Appendix
45 | 3/7/06, 6:25 PM |