Pioneer DV-868AVi Controls and displays Chapter, Front panel, Progressive button/indicator

03Controls and displays

Chapter 3

Controls and displays

The following illustrations show the DV-868AVi, but controls and displays for the DV-668AV are the same except where indicated.

Front panel

1 2 3 4 5 6 7 8 9 10 11

STANDBY

POWER

HDMI PROGRESSIVE PURE AUDIO

OFF ON

RW

COMPATIBLE

AUDIO/VIDEO

Î

OPEN/CLOSE

)

$! ⁄›

&*

‹

16 15 14 13 12

1POWER switch (DV-868AVi only)

Press to switch the player on or off (the player can be put into standby using the remote control; the STANDBY indicator above the button lights when in standby).

STANDBY/ON (DV-668AV only) Press to switch the player into standby.

2STANDBY indicator (DV-868AVi only) Lights when in standby.

3i.LINK indicator (DV-868AVi only) Lights when this player is recognized by another i.LINK compatible component.

4HDMI indicator

Lights when this player is recognized by another HDMl or DVI/HDCP compatible component.

5 PROGRESSIVE button/indicator

Press to switch the component video output mode between progressive and interlace. The indicator lights in progressive scan mode.

See also Component Out on page 62.

•This player is compatible with both PAL and NTSC progressive scan formats. However, your TV must also be progressive scan compatible to take advantage of this feature.

6 PURE AUDIO button/indicator

When the player is stopped, press to switch off/on the front panel display and disable the video and digital outputs*. Use this when you want to hear audio from the analog outputs with no interference from other signals (when listening to a DVD-Audio disc, for example). The indicator lights when the Pure Audio feature is switched on.

*These include i.LINK, HDMI, and the coaxial and optical digital outputs.

24

En