Pioneer DV-868AVi, DV-668AV Initial Settings menu Chapter, Digital Out, Default setting On

08Initial Settings menu

Chapter 8

Initial Settings menu

Using the Initial Settings	Digital Audio Out settings
menu

The Initial Settings menu gives you complete control in setting up your DVD player, including audio, and video output settings, audience limitation settings, among others.

If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.

1Press HOME MENU and select ‘Initial Settings’ from the on-screen display.

	HOME MENU
	DVD
Audio Settings	Video Adjust
Play Mode	Disc Navigator
Initial Settings	Setup Navigator

2Select the setup category from the list on the left, then select an item from the menu list to the right.

3Make the setting you want.

•The language options shown in the on- screen display illustrations on the following pages may not correspond to those available in your country or region.

•None of the Digital Audio Out settings affect the audio output from the i.LINK interface (DV-868AVi only). For i.LINK settings, see i.LINK Setup on page 76.

Digital Out

• Default setting: On

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs.

Initial Settings
Digital Audio Out	Digital Out	On
Video Output	Dolby Digital Out	Off
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers
i.LINK Setup

If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On.

•You can’t switch on/off the optical and coaxial outputs individually.

•There is no digital output when playing SACDs and some DVD-Audio discs regardless of this setting.

60

En