Pioneer DV-868AVi, DV-668AV operating instructions Link Setup, Audio Out

08Initial Settings menu

Automatic: Select Auto to start the test tone output. No sound will be heard from the subwoofer.

To turn the test tone on/off for an individual speaker, move the cursor right. The test tone continues playing even when you select a different speaker.

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

As the test tone plays through each speaker in turn, it is highlighted on-screen. Use the Joystick (up/down) to adjust the channel output level of the current speaker. Move the cursor left to exit the test tone sequence, or press ENTER to save the settings and exit the Channel Level setting screen.

Manual: Use the Joystick to move the cursor up/down to select a speaker.

To save the settings and exit, press ENTER with the channel level field highlighted (as shown above).

•The subwoofer output will sound quite low compared to the other speakers.

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

i.LINK Setup

(DV-868AVi only)

Audio Out

• Default setting: On

Move the cursor right (or press ENTER) then use the Joystick (up/down) to set the channel output level.

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

Initial Settings
Digital Audio Out	Audio Out	On
Video Output	Connections Setup	Off
Language	Auto Select Play
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

76

En