Pioneer DV-868AVi, DV-668AV Check that Linear PCM Out is set to Down Sample Off

Page 92

09Additional information

Problem

Cannot listen to high- sampling rate audio through the optical/coaxial digital output.

Remedy

Make sure that Linear PCM Out is set to Down Sample Off (see Linear PCM Out on page 61).

As a copy-protection measure, some DVDs do not output 96kHz audio. In this case, even if set to Down Sample Off, the player automatically outputs the audio at 48 kHz. This is not a malfunction.

Cannot output 192kHz or

• The player does not output digital audio from the optical/coaxial

176.4kHz digital audio from

jacks at these sampling rates. The digital output is automatically

optical/coaxial output.

downsampled.

 

 

Cannot output 96kHz or

• Check that Linear PCM Out is set to Down Sample Off

88.2kHz digital audio from

(see Linear PCM Out on page 61).

optical/coaxial output.

• Some discs are digital copy protected and do not output high

 

sampling rate digital audio. In this case the output is automatically

 

downsampled.

No DTS audio output from optical/coaxial output.

If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set DTS Out to DTS > PCM. If you do not do this, noise will be output when you play a DTS disc.

If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the amplifier settings, and that the cable is properly connected.

Audio mix does not sound right or sounds incomplete (for example, inaudible dialog).

Make sure that Audio Output Mode is set to 2 Channel if you've connected to the stereo inputs on your amplifier or TV (see Audio Output Mode on page 73).

Disc containing the MP3

• This player is compatible with multi-session discs, but only plays

tracks won’t play.

sessions that are closed.

 

• If the message UNPLAYABLE is displayed when you try to play a

 

disc/track, check the audio file formats (see Compressed audio

 

compatibility on page 9).

 

 

Can’t hear effect of

• TruSurround does not work with CD, MP3, DVD-Audio, SACD or

TruSurround

96kHz linear PCM DVD.

 

• The TruSurround effect is only output through the AUDIO OUT

 

(2ch) analog audio outputs.

 

• Make sure that Audio Output Mode is set to 2 Channel (see Audio

 

Output Mode on page 73).

 

• The effectiveness of TruSurround varies with the disc.

 

 

The audio recorded on a

• If the audio is switched to [2] when playing a Super VCD that

Super VCD disc is not

contains only one stereo soundtrack, there may be no sound at all.

output properly.

Press AUDIO to change the soundtrack.

 

 

92

En

Image 92
Contents DV-868AViDV-668AV For DV-668AV only For DV-868AVi only On the top of the playerOperating Environment Contents Video Settings menu Initial Settings menuVideo Adjust Creating your own presetsBefore you start Chapter FeaturesBefore you start Virtual Dolby Digital using SRS TruSurround*8 Before you startSuper Fine Focus digital filter MP3 compatibilityBefore you start What’s in the box Putting the batteries in the remote controlUsing the remote control General disc compatibility CD-R/RW compatibilityDVD-R/RW compatibility Compressed audio compatibilityCDs, SACDs and Video CD/Super VCDs are divided into tracks Titles, chapters, groups and tracksPC created disc compatibility Before you start DVD-Video regions Connecting up Connecting up ChapterAV Connector 1 RGB-TV/AV Receiver Rear panelVideo OUT 1&2 Connecting upAudio i.LINK connectors DV-868AVi only Connecting up Easy connections To power outletConnecting using the AV connector output Connecting up Using other types of video outputConnecting using an S-Video output AV Connector 2 only outputs composite video Connecting for multichannel surround soundConnecting using the component video output Connecting using the multichannel analog outputs AV receiverNot supplied to connect the Optical Connecting using a digital audio outputOptical connection Use an optical cable Connecting using i.LINK Connector AV receiver InputAbout i.LINK Creating an i.LINK networkConnecting using Hdmi HdmiAbout Hdmi My TV only has one input for the sound Progressive button/indicator Pure Audio button/indicatorControls and displays Controls and displays ChapterControls and displays Controls and displays About progressive scan video Compatibility of this unit with progressive-scan TVs1CH GUI Graphical User Interface10 CHP Character displayNumber buttons Controls and displays Remote controlEnter & Joystick TruSurround Jog indicatorMulti dial Setting the TV system Switching onGetting Started Getting Started ChapterGetting Started Let’s Get StartedUsing the on-screen displays Press Enter again to finish setting upSetting up with the Setup Navigator Select ‘Setup Navigator’On-screen display OSD appears Select a DVD languageDid you connect this player to an AV receiver? Congratulations, setup is complete If the player isn’t already on, press Power to switch it on Getting Started Playing discsBasic playback controls Press OPEN/CLOSE to open the disc tray Load a discWhen you eject the disc tray Way as their remote control equivalents.DVD disc menus Front panel controlsVideo CD/Super VCD PBC menus Displays the PBC menuWhy won’t the disc I loaded play? Disc may have been illegally copiedThere’s no picture from the Hdmi output Introduction Playing discsPlaying discs Chapter Scanning discs To resume normal playback, press playUsing the Multi dial Playing in slow motionDuring playback, press Pause Press and hold Until Press repeatedly to change the slow motion speedFrame advance/frame reverse Looping a section of a discUsing repeat play Using random playCreating a program list Select a random play optionRandom Title Random Chapter Random Off Random Group Random Track Random OffSelect ‘Create/Edit’ from the list of program options To play the program list, press play Editing a program listRepeat to build up a program List Select a program play function Searching a discOther functions available from the program menu Switching subtitles Switching the DVD audio languagePress Enter to start playback Press Subtitle repeatedly to select a subtitle optionSwitching DVD-RW audio channels Switching camera anglesSwitching DVD-Audio audio channels Displaying disc informationDVD-RW displays Sacd displaysCD and Video CD displays During PBC playback onlyAudio Settings menu Audio Settings menu ChapterAudio DRC Legato PROAudio Settings menu There are four settings, plus OffHi-Bit Virtual SurroundChannel Level Speaker Distance Video Settings menu Video Settings menu ChapterVideo Adjust Creating your own presetsVideo Settings menu Adjust the picture quality settingsVideo Settings menu Initial Settings menu Initial Settings menu ChapterUsing the Initial Settings Digital Audio Out settings Menu Default setting OnInitial Settings menu Dolby Digital OutDTS Out Linear PCM OutVideo Output settings Mpeg OutTV Screen Component OutAV Connector Out Default setting VideoDefault setting S2 Video OutLanguage settings Still PictureAudio Language Subtitle LanguageDVD Menu Language Default setting w/Subtitle LangAuto Language Display settings Registering a new password Changing your passwordOptions Parental LockSetting/changing the Parental Lock level Setting/changing the Country CodeSelect a Country Code Bonus GroupSelect ‘Country Code’ DVD Playback Mode Default setting SingleDefault setting DVD-Audio Auto Disc MenuSacd Playback Hdmi SettingsDefault setting 2ch Area Resolution Video MemoryAspect Ratio AudioAudio Output Mode SpeakersCD Playback DTS DownmixSpeaker Installation Set in Setup Navigator default L/RDefault setting all speakers 3 m Speaker DistanceChannel Level Link Setup Audio OutConnections Setup Auto Select PlayDefault setting 5.1 Channel DVD-Audio OutTaking care of your player and discs Additional informationAdditional information Chapter Additional information Resetting the player Screen sizes and disc formatsWidescreen TV users Standard TV usersAdditional information About the audio output settings DTS CDAdditional information About the Hdmi output settings Additional information About the i.LINK output settings Additional information Language Code list Country Code listLanguage Language Code letter, Language Code Country, Country Code, Country Code letterGlossary Dynamic range File extensionMpeg audio LinkPqls Precision Quartz Lock System rate control Progressive scan videoRegions DVD-Video only S1 S-video outputDisc won’t play or is automatically ejected after loading Additional information TroubleshootingGeneral DVD/CD/Video CD/Super VCD player Clean if necessary. Also check the cable for damage Speaker settings, etcSwitch it off Check that all interconnects are firmly insertedCheck that Linear PCM Out is set to Down Sample Off Effectiveness of TruSurround varies with the discHdmi troubleshooting Link troubleshooting Output Mode is set to 5.1 Channel see Audio Output Mode onYou’re trying to play for example, Sacd Check that your AV receiver is set to the correct inputLINK-related messages With this player Other componentAdditional information Specifications Other terminals AccessoriesDigital output Pioneer Corporation