Pioneer DV-668AV, DV-868AVi operating instructions Channel Level

Audio Settings menu 06

1 Press HOME MENU and select ‘Audio			1 Press HOME MENU and select ‘Audio
Settings’ from the on-screen display.			Settings’ from the on-screen display.
2 Highlight ‘Virtual Surround’, then use			2 Highlight ‘Channel Level’, then use the
the Joystick (left/right) to change to ‘2V/			Joystick (left/right) to change to ‘Fix’ or
SRS TruSurround’ or ‘Off’, as required.			‘Variable’, as required.
	Audio Settings	1/ 2		Audio Settings	1/ 2
	Audio DRC	Off		Audio DRC	Off
	Legato PRO	Off		Legato PRO	Off
	Hi-Bit			Hi-Bit
		On			On
	Virtual Surround	Off		Virtual Surround	Off
	Channel Level	Fix		Channel Level	Fix

English

3Press ENTER to make the setting and exit the Audio Settings screen.

•You can also use the SURROUND button on the remote control to switch Virtual Surround on (2V/SRS TruSurround)/ Off.

•Virtual Surround does not work with CD, MP3, DVD-Audio or SACD discs, or 96kHz Linear PCM soundtracks.

•The Virtual Surround effect is output only through the analog AUDIO OUT (2ch) jacks.

•Make sure that Audio Output Mode is set to 2 Channel (see Audio Output Mode on page 73).

•How good the surround effect is varies with the disc.

Channel Level

• Default setting: Fix

This setting allows you to set the level of each channel sent to the 5.1 channel analog outputs.

•Fix – Channel levels are fixed, but you can set the speaker distances

•Variable – You can specify variable channel levels as well as speaker distances

3If you chose ‘Variable’, use the Joystick (down) to proceed to the next screen.

Audio Settings	1/ 3
Audio DRC	Off
Legato PRO
	Off
Hi-Bit	On
Virtual Surround
	Off
Channel Level	Variable

4Variable setting only: Set the channel levels for each speaker.

Audio Settings	2/ 3
Channel Level L	0.0 dB
Channel Level C	0.0 dB
Channel Level R
	0.0 dB
Channel Level RS	0.0 dB
Channel Level LS
	0.0 dB
Channel Level SW	0.0 dB

•Use the Joystick (up/down) to select a speaker.

•Use the Joystick (left/right) to adjust the channel level for that speaker.

Channel levels can be set from –6 dB to +6 dB. in 0.5 dB increments.

55

En