Pioneer DV-668AV General disc compatibility, CD-R/RW compatibility, DVD-R/RW compatibility

Page 9

Before you start

Disc / content format playback compatibility

General disc compatibility

This player was designed and engineered to be compatible with software bearing one or more of the following logos:

DVD-Audio DVD-Video DVD-R DVD-RW

Audio CD Video CD

CD-R

CD-RW

Super VCD

Super Audio CD

Other formats, including but not limited to the following, are not playable in this player:

Photo CD, DVD-RAM, DVD-ROM, CD- ROM*

*Except those that contain MP3 files formatted as specified in the Compressed audio compatibility section.

DVD-R/RW and CD-R/RW discs (Audio CDs and Video CD/Super VCDs) recorded using a DVD recorder, CD recorder or personal computer may not be playable on this unit. This may be caused by a number of possibilities, including but not limited to: the type of disc used; the type of recording; damage, dirt or condensation on either the disc or the player’s pick-up lens. See below for notes about particular software and formats.

CD-R/RW compatibility

This unit will play CD-R and CD-RW discs recorded in CD Audio or Video CD/Super VCD format, or as a CD-ROM containing MP3 audio files. However, any other content may cause the disc not to play, or create noise/distortion in the output.

This unit cannot record CD-R or CD-RW discs.

Unfinalized CD-R/RW discs recorded as CD Audio can be played, but the full Table of Contents (playing time, etc.) will not be displayed.

DVD-R/RW compatibility

This unit will play DVD-R/RW discs that were recorded using the DVD Video format or Video Recording format.

This unit cannot record DVD-R/RW discs.

Unfinalized DVD-R/RW discs cannot be played in this player.

Compressed audio compatibility

This unit will play CD-ROM discs containing files saved in the MPEG-1 Audio Layer 3 format (MP3) with a sampling rate of 44.1 or 48kHz. Incompatible files will not play and UNPLAYABLE will be displayed on the unit.

Fixed bit-rate files are recommended. Variable bit-rate (VBR) files are playable, but playing time may not be shown correctly.

The CD-ROM used to compile your MP3 files must be ISO 9660 Level 2 compliant.

CD physical format: Mode1, Mode2 XA Form1.

This player only plays tracks that are named with the file extension “.mp3” or “.MP3”.

01

English

9

En

Image 9
Contents DV-868AViDV-668AV On the top of the player For DV-668AV only For DV-868AVi onlyOperating Environment Contents Initial Settings menu Video Settings menuVideo Adjust Creating your own presetsFeatures Before you startBefore you start Chapter Before you start Virtual Dolby Digital using SRS TruSurround*8Super Fine Focus digital filter MP3 compatibilityPutting the batteries in the remote control Using the remote controlBefore you start What’s in the box CD-R/RW compatibility General disc compatibilityDVD-R/RW compatibility Compressed audio compatibilityTitles, chapters, groups and tracks PC created disc compatibilityCDs, SACDs and Video CD/Super VCDs are divided into tracks Before you start DVD-Video regions Connecting up Chapter Connecting upAV Connector 1 RGB-TV/AV Receiver Rear panelConnecting up Audio i.LINK connectors DV-868AVi onlyVideo OUT 1&2 To power outlet Connecting up Easy connectionsConnecting up Using other types of video output Connecting using an S-Video outputConnecting using the AV connector output Connecting for multichannel surround sound Connecting using the component video outputAV Connector 2 only outputs composite video AV receiver Connecting using the multichannel analog outputsConnecting using a digital audio output Optical connection Use an optical cableNot supplied to connect the Optical Connector AV receiver Input Connecting using i.LINKCreating an i.LINK network About i.LINKHdmi Connecting using HdmiAbout Hdmi My TV only has one input for the sound Pure Audio button/indicator Progressive button/indicatorControls and displays Controls and displays ChapterControls and displays Compatibility of this unit with progressive-scan TVs Controls and displays About progressive scan videoGUI Graphical User Interface 1CH10 CHP Character displayControls and displays Remote control Enter & JoystickNumber buttons Jog indicator Multi dialTruSurround Switching on Setting the TV systemGetting Started Getting Started ChapterLet’s Get Started Getting StartedPress Enter again to finish setting up Using the on-screen displaysSelect ‘Setup Navigator’ Setting up with the Setup NavigatorOn-screen display OSD appears Select a DVD languageDid you connect this player to an AV receiver? Congratulations, setup is complete Getting Started Playing discs If the player isn’t already on, press Power to switch it onBasic playback controls Press OPEN/CLOSE to open the disc tray Load a discWay as their remote control equivalents. When you eject the disc trayDVD disc menus Front panel controlsDisplays the PBC menu Video CD/Super VCD PBC menusDisc may have been illegally copied Why won’t the disc I loaded play?There’s no picture from the Hdmi output Playing discs Playing discs ChapterIntroduction To resume normal playback, press play Scanning discsPlaying in slow motion Using the Multi dialDuring playback, press Pause Press and hold Until Press repeatedly to change the slow motion speedLooping a section of a disc Frame advance/frame reverseUsing random play Using repeat playSelect a random play option Creating a program listRandom Title Random Chapter Random Off Random Group Random Track Random OffSelect ‘Create/Edit’ from the list of program options Editing a program list Repeat to build up a program ListTo play the program list, press play Searching a disc Other functions available from the program menuSelect a program play function Switching the DVD audio language Switching subtitlesPress Enter to start playback Press Subtitle repeatedly to select a subtitle optionSwitching camera angles Switching DVD-RW audio channelsSwitching DVD-Audio audio channels Displaying disc informationSacd displays DVD-RW displaysCD and Video CD displays During PBC playback onlyAudio Settings menu Chapter Audio Settings menuAudio DRC Legato PROThere are four settings, plus Off Audio Settings menuHi-Bit Virtual SurroundChannel Level Speaker Distance Video Settings menu Chapter Video Settings menuVideo Adjust Creating your own presetsAdjust the picture quality settings Video Settings menuVideo Settings menu Initial Settings menu Chapter Initial Settings menuUsing the Initial Settings Digital Audio Out settings Menu Default setting OnDolby Digital Out Initial Settings menuDTS Out Linear PCM OutMpeg Out Video Output settingsTV Screen Component OutDefault setting Video AV Connector OutDefault setting S2 Video OutStill Picture Language settingsAudio Language Subtitle LanguageDefault setting w/Subtitle Lang Auto LanguageDVD Menu Language Display settings Changing your password Registering a new passwordOptions Parental LockSetting/changing the Country Code Setting/changing the Parental Lock levelBonus Group Select ‘Country Code’Select a Country Code Default setting Single DVD Playback ModeDefault setting DVD-Audio Auto Disc MenuHdmi Settings Default setting 2ch AreaSacd Playback Video Memory ResolutionAspect Ratio AudioSpeakers Audio Output ModeCD Playback DTS DownmixSet in Setup Navigator default L/R Speaker InstallationDefault setting all speakers 3 m Speaker DistanceChannel Level Audio Out Link SetupAuto Select Play Connections SetupDVD-Audio Out Default setting 5.1 ChannelAdditional information Additional information ChapterTaking care of your player and discs Additional information Screen sizes and disc formats Resetting the playerWidescreen TV users Standard TV usersDTS CD Additional information About the audio output settingsAdditional information About the Hdmi output settings Additional information About the i.LINK output settings Country Code list Additional information Language Code listLanguage Language Code letter, Language Code Country, Country Code, Country Code letterGlossary File extension Dynamic rangeMpeg audio LinkProgressive scan video Pqls Precision Quartz Lock System rate controlRegions DVD-Video only S1 S-video outputAdditional information Troubleshooting GeneralDisc won’t play or is automatically ejected after loading DVD/CD/Video CD/Super VCD player Speaker settings, etc Clean if necessary. Also check the cable for damageSwitch it off Check that all interconnects are firmly insertedEffectiveness of TruSurround varies with the disc Check that Linear PCM Out is set to Down Sample OffHdmi troubleshooting Output Mode is set to 5.1 Channel see Audio Output Mode on Link troubleshootingYou’re trying to play for example, Sacd Check that your AV receiver is set to the correct inputWith this player Other component LINK-related messagesAdditional information Specifications Accessories Digital outputOther terminals Pioneer Corporation