Pioneer DV-668AV, DV-868AVi Speakers, CD Playback, DTS Downmix, Audio Output Mode

Initial Settings menu 08

•It is not possible to output SACD, or copy- controlled DVD-Audio CPPM sources from the HDMI connection.

•96/192 kHz sources are downsampled to 48 kHz and 88.2/176.4 kHz sources are downsampled to 44.1 kHz.

CD Playback

• Default setting: PCM Playback

Initial Settings
Digital Audio Out	CD Playback
		PCM Playback
Video Output	DTS Downmix	DTS CD Playback
Language
Display
Options
Speakers
i.LINK Setup

When set to PCM Playback, playback is optimized for standard audio CDs. You can also play DTS CDs, however you may notice some noise when a DTS CD starts playing. This is not a malfunction.

When set to DTS CD Playback, playback is optimized for DTS CDs. In this mode you cannot play standard audio CDs through the analog outputs. Change the setting back to PCM Playback to play standard CDs.

The i.LINK audio output (DV-868AVi only) is not affected by this setting.

DTS Downmix

• Default setting: Stereo

Initial Settings
Digital Audio Out	CD Playback	Stereo
Video Output	DTS Downmix	Lt/Rt
Language
Display
Options
Speakers
i.LINK Setup

If you’ve selected DTS > PCM in DTS Out on page 61, or 2 Channel in Audio Output Mode below, you can choose the way the DTS signal is downmixed PCM audio. Stereo downmixes the signal to 2-channel stereo, whereas Lt/Rt downmixes to a 2-channel signal compatible with Dolby surround matrix decoders. (This allows you to hear surround sound if your AV receiver or amplifier has Dolby Pro Logic capability.)

Speakers

Audio Output Mode

•Set in Setup Navigator (Default: 2 Channel)

Initial Settings
Digital Audio Out	Audio Out
		2 Channel
Video Output	Speaker Installation	5.1 Channel
Language	Speaker Distance
Display	Channel Level
Options
Speaker
i.LINK Setup

If you connected this player to an AV receiver using the 5.1 channel analog outputs, set this to 5.1 Channel. This will enable you to enjoy multichannel sound.

If you connected only the stereo analog outputs, set to 2 Channel. On this setting multichannel audio is downmixed to 2 channels for stereo analog output.

•When set to 5.1 Channel, you’ll only get sound from all speakers when playing multichannel discs.

•When set to 5.1 Channel the AUDIO OUT (2ch) jacks output the front L/R channels of multichannel discs.

English

73

En