Check that all interconnects are firmly inserted

Additional information

Problem	Remedy
No audio, or audio is	• No audio is output during slow motion playback or when scanning
distorted.	discs other than audio CDs.
	• Some DVD discs do not output digital audio: Switch your amplifier
	to the player's analog outputs.
	• Check that the disc is free from dust and dirt, and that it is not
	damaged (see Taking care of your player and discs on page 79).
	• Check that all interconnects are firmly inserted.
	• Check that the plugs and terminals are free of dirt, oxide, etc. and
	clean if necessary. Also check the cable for damage.
	• Make sure the player's output is not connected to the amplifier's
	phono (turntable) inputs.
	• Check your amplifier/receiver’s settings (volume, input function,
	speaker settings, etc.).
	• DV-868AVionly–If the i.LINK interface is active, all other audio
	outputs are switched off. See Audio Out on page 76 for how to
	switch it off.

The analog audio is OK, but	• Make sure that the Digital Out setting is set to On (see Digital Out
there appears to be no	on page 60).
optical/coaxial digital audio	• Check that the Dolby Digital, DTS and MPEG Out settings (see
signal.	Digital Audio Out settings on page 60) are suitable for your amplifier/
	receiver—check the instruction manual that came with your
	amplifier/receiver.
	• SACDs and some DVD-Audio discs do not output digital audio.
	Listen through the player’s analog audio outputs.
	• Check that the PURE AUDIO indicator is not lit. If it is, press the
	PURE AUDIO button (See also Front panel on page 24).

Noticeable difference in	• This is due to differences in the audio format and is not a
DVD and CD volume.	malfunction.

Cannot play multi-channel	• Make sure that Audio Output Mode is set to 5.1 Channel (see
audio.	Audio Output Mode on page 73).
	• Check that the Dolby Digital, DTS and MPEG Out settings (see
	Digital Audio Out settings on page 60) are suitable for your amplifier/
	receiver—check the instruction manual that came with your
	amplifier/receiver.
	• DVD-Audio and SACDs do not output multichannel digital audio.
	Listen through the player’s analog outputs.
	• Check that the settings in the Speaker Installation on page 74 are
	correct.
	• Check the audio options available from the disc menu.

Pioneer DV-668AV Check that all interconnects are firmly inserted, Phono turntable inputs

Additional information

Problem

Remedy

damaged (see Taking care of your player and discs on page 79).

• Check that all interconnects are firmly inserted.

clean if necessary. Also check the cable for damage.

phono (turntable) inputs.

speaker settings, etc.).

switch it off.

The analog audio is OK, but

amplifier/receiver.

• SACDs and some DVD-Audio discs do not output digital audio.

Listen through the player’s analog audio outputs.

• This is due to differences in the audio format and is not a

Audio Output Mode on page 73).

Listen through the player’s analog outputs.

correct.

• Check the audio options available from the disc menu.

English