Pioneer DV-667A-S CD-R/RW compatibility, DVD-R/RW compatibility, PC-created disc compatibility

Page 11

Before you start

01

ties, including but not limited to: the type of disc used; the type of recording; damage, dirt or condensation on either the disc or the player’s pick-up lens. See below for notes about particular software and formats.

CD-R/RW compatibility

This unit will play CD-R and CD-RW discs recorded in CD Audio or Video CD/Super VCD format, or as a CD-ROM containing MP3 or JPEG files. However, any other content may cause the disc not to play, or create noise/distortion in the output.

This unit cannot record CD-R or CD-RW discs.

Unfinalized CD-R/RW discs recorded as CD Audio can be played, but the full Table of Contents (playing time, etc.) will not be displayed.

DVD-R/RW compatibility

This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder.

This unit will play DVD-RW discs recorded using the Video Recording (VR) format.

DVD-RWshows in the display when a VR format DVD-RW disc is loading.

When playing a VR format DVD-RW discs that was edited on a DVD recorder, the screen may go momentarily black at edited points and/or you may see scenes from immediately before the edited point.

This unit cannot record DVD-R/RW discs.

Unfinalized DVD-R/RW discs cannot be played in this player.

PC-created disc compatibility

If you record a disc using a personal computer, even if it is recorded in a “compatible format” as listed above, there will be cases in which the disc may not be playable in this machine due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information.

Check the DVD-R/RW or CD-R/RW soft- ware disc boxes for additional compati- bility information.

Compressed audio compatibility

This unit will play CD-ROM, CD-R, and CD-RW discs containing files saved in the MPEG-1 Audio Layer 3 (MP3) format with a sampling rate of 32, 44.1 or 48kHz. Incompatible files will not play and the message Can’t play this format will be displayed (NO PLAY in the front panel display).

Fixed bit-rate MP3 files are recom- mended. Variable bit-rate (VBR) MP3 files are playable, but playing time may not be shown correctly..

The CD-ROM used to compile your MP3 files must be ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file systems are both compatible with this player.

Use CD-R or CD-RW media for recording your files. The disc must be finalized (i.e. the session must be closed) in order to play in this unit. This player is not compat- ible with multi-session discs. Only the first session of a multi-session disc will be recognized.

This player only plays tracks that are named with the file extension .mp3 or

.MP3.

11

En

Image 11
Contents DV-563ADV-667A-SDV-667A-K Important Safety Instructions Important Notice For U.S. modelFor Canadian model On the bonnet of the unit Operating Environment H045EnContents Additional information Audio Settings menuVideo Adjust menu Initial Settings menu Before you start Chapter Features Before you start Before you start What’s in the box Putting the batteries in the remote controlGeneral disc compatibility Disc / content format playback compatibilityUsing the remote control Before you startCompressed audio compatibility CD-R/RW compatibilityDVD-R/RW compatibility PC-created disc compatibilityJpeg file compatibility Audio OUT 2ch Connecting upConnecting up Chapter Rear panel connectionsConnecting up Easy connections Connecting using the S-video output Connecting upUsing other types of video output Component Video Connecting up Connecting using the component video outputConnecting using the multichannel analog outputs Connecting up Connecting for multichannel surround soundConnecting up Connecting to an AV receiver If your TV has no inputs you can’t use this player with it Front panel Controls and displaysControls and displays Chapter 15 DTS Controls and displays Display1CH Character displayPress to display or exit the on-screen display Controls and displays Remote controlPress to select a subtitle display see Number buttonsPress to clear a numeric entry Press to activate/switch off 2V/SRS TruSur- roundControls and displays Press to open or close the disc trayLet’s Get Started Switching onGetting started Getting started ChapterGetting started Using the on-screen displaysIf a disc is playing, press stop Setting up with the Setup NavigatorSelect ‘Setup Navigator’ Menu playSelect a DVD language DTS Press OPEN/CLOSE to open the disc tray Congratulations, setup is completePlaying discs Press play to start playback Load a discShows Resume or Last MEM Basic playback controlsFront panel controls DVD disc menusResume and Last Memory Video CD/Super VCD PBC menus Introduction Playing discsPlaying discs Chapter DVD-RW Frame advance/frame reverse Playing discs Scanning discsPlaying in slow motion Press Enter on ‘BEnd Point’ to set the loop end point Using repeat playLooping a section of a disc Press Enter on ‘AStart Point’ to set the loop start pointTitle Repeat or Chapter Repeat or Repeat Off Select a repeat play optionSelect a random play option Playing discs Using random playThen press Cursor right and select a Chapter from the list Playing discs Creating a program listSelect ‘Create/Edit’ from the list of program options To add a chapter, first highlight the titleTo play the program list, press play Repeat to build up a program ListSelect a program play function Create/Edit See above Editing a program listOther functions available from the program menu Press Subtitle repeatedly to select a subtitle option Switching subtitlesPlaying discs Searching a disc Press Enter to start playbackSwitching DVD-Audio audio channels Playing discs Switching DVD-Video audio languageSwitching VR format DVD-RW audio channels Displaying disc information Switching camera anglesPlaying discs Zooming the screen During multichannel playback only DVD-Audio displaysVR format DVD-RW displays Sacd displaysPress Menu to display the Disc Navi- gator screen Viewing Jpeg discsViewing Jpeg discs Chapter Viewing Jpeg discsTo resume the slideshow, press play Using the Photo BrowserUse the cursor buttons Highlight a thumbnail picture Use the cursor buttons Change the zoomed areaVirtual Surround Audio Settings menuAudio Settings menu Chapter Audio DRCTo ‘Fix’ or ‘Variable’, as required Audio Settings menuChannel Level Select a speaker Speaker DistanceUse Creating your own presets Video Adjust menuVideo Adjust menu Chapter Video AdjustVideo Adjust menu Digital Audio Out settings Initial Settings menuInitial Settings menu Chapter Using the Initial Settings menuLinear PCM Out Initial Settings menuDolby Digital Out DTS OutComponent Out Video Output settingsMpeg Out TV ScreenSTANDBY/ON while Default setting InterlacePressing To switch the player About progressive scan videoCompatibility of this unit with progressive-scan TVs Language settingsVideo Out Audio LanguageDVD Menu Language Default setting w/Subtitle LangSubtitle Language On Screen Display Display settingsOSD Language Subtitle DisplayParental Lock Angle IndicatorOptions Use the number buttons to enter a 4- digit password Registering a new passwordChanging your password Select ‘Password’Setting/changing the Country code Setting/changing the Parental Lock levelAuto Disc Menu Bonus GroupSacd Playback DVD Playback ModeGroup Playback DTS DownMix Audio Output ModeSpeakers PhotoViewerSpeaker Installation Speaker Use Cursor up/down to Change the distance Speaker DistanceChannel Level Speaker distance for the highlightedDifferent speaker Handling discs Additional informationAdditional information Chapter Taking care of your player and discsAdditional information Widescreen TV users Power cable cautionScreen sizes and disc formats Moving the playerCDs, SACDs and Video CDs/Super VCDs are divided into tracks Resetting the playerTitles, chapters, groups and tracks Additional information DVD-Video regions Selecting languages using the language code listDTS CD About the audio output settingsCountry, Country code, Country code letter Additional information Language code listCountry code list Language Language code letter, Language codeAdditional information Glossary ISO 9660 format File extensionPacked PCM DVD-Audio only Interlaced videoSlidshow DVD, Video CD/Super VCD S1 S-video outputS2 S-video output Sampling frequencyPress Setup TV system changes as follows Additional information Setting the TV SystemWatching Ntsc on a PAL TV Additional information Troubleshooting No audio, or audio is distorted Picture disturbance during playback or the picture is darkTracks won’t play DVD and CD volumeTruSurround Linear PCM DVD Make sure that Audio Output Mode is set to 2 ChannelAdditional information Specifications Additional information Pioneer Corporation