Pioneer DV-667A-S Audio Settings menu, Channel Level, To ‘Fix’ or ‘Variable’, as required

07Audio Settings menu

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

	HOME MENU
	DVD
Audio Settings	Video Adjust
Play Mode	Disc Navigator
Initial Settings	Setup Navigator

2 Highlight Virtual Surround, then use

the (cursor left/right) buttons to change to ‘2V/SRS TruSurround’ or ‘Off’, as required.

Audio Settings	1/ 2 page
Audio DRC	Off
Virtual Surround	Off
Channel Level	Fix

3Press ENTER to make the setting and exit the Audio Settings screen.

•You can also use the SURROUND button on the remote control to switch Virtual Surround on (2V/SRS TruSurround)/ Off.

•Virtual Surround does not work with DTS, DVD-Audio or SACD discs, or 96kHz Linear PCM soundtracks.

•If the player is outputting Dolby Digital or MPEG bitstream audio (in other words, no conversion to PCM), Virtual Surround has no effect on the audio from the digital output. See Digital Audio Out settings on page 54 for how to set up the digital output formats.

50

•Make sure that Audio Output Mode is set to 2 Channel (page 66).

•How good the surround effect is varies with the disc.

Channel Level

• Default setting: Fix

This setting allows you to set the level of each channel sent to the 5.1 channel analog outputs.

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

	HOME MENU
	DVD
Audio Settings	Video Adjust
Play Mode	Disc Navigator
Initial Settings	Setup Navigator

2 Highlight Channel Level, then use the buttons (cursor left/right) to change

to ‘Fix’ or ‘Variable’, as required.

Audio Settings	1/ 2 page
Audio DRC	Off
Virtual Surround	Off
Channel Level	Fix

•Fix – Channel levels are fixed

•Variable – You can specify variable channel levels

3 If you chose Variable, press (cursor down) to proceed to the next screen.

Audio Settings	1/ 3 page
Audio DRC	Off
Virtual Surround	Off
Channel Level	Variable

En