Pioneer DV-667A-K, DV-563A Connecting up Chapter, Rear panel connections, Audio OUT 2ch

Connecting up 02

Chapter 2

Connecting up

Rear panel connections

	1	2				3	4	5		6	DV-563A
						Y	PB	AUDIO OUT(2CH)
		D1/D2	DIGITAL	COAXIAL				L	L		CENTER
CONTROL		VIDEO OUT	AUDIO OUT
IN	OUT										AUDIO OUT
											(5.1CH)
					S		PR	R	R		SUB
			OPTICAL			VIDEO OUT			FRONT	SURROND	WOOFER

COMPONENT VIDEO OUT

10 9 8 7

•When connecting this player up to your TV, AV receiver or other components, make sure that all components are switched off and unplugged.

1 CONTROL IN / OUT

For passing remote control signals to other Pioneer components (page 19).

2D1/D2 VIDEO OUT (DV-667A Taiwanese model only)

Use to connect this player to a TV with a D video input (page 16).

3DIGITAL AUDIO OUT – COAXIAL

This is a digital audio output for connection to a PCM, Dolby Digital, DTS and/or MPEG- compatible AV receiver that has a coaxial digital input.

Connect using a commercially available coaxial digital audio cable.

4 COMPONENT VIDEO OUT

High quality video output for connection to a TV, monitor or AV receiver that has compo- nent video inputs.

Connect using a commercially available three-way component video cable. Be careful to match the colors of the jacks and cables for correct connection (page 16).

5 AUDIO OUT (2ch)

Two channel analog audio outputs for connection to your TV, AV receiver or stereo system (pages 14,17,18).

Use the supplied audio/video cable when connecting these jacks. Match the colors of the jacks and cables for correct stereo sound.

6AUDIO OUT (5.1ch) Multichannel analog audio outputs for connection to an AV receiver with multi- channel inputs (page 17).

7AC IN

Connect the supplied power cord here, then plug into a power outlet.

8 VIDEO OUT

Standard video output that you can connect to your TV or AV receiver using the supplied audio/video cable (pages 14,17,18).

9 S (S-Video output)

S-Video output that you can use instead of the video output described in 8 above (page 15).

10 DIGITAL AUDIO OUT – OPTICAL

This is a digital audio output for connection to a PCM, Dolby Digital, DTS and/or MPEG compatible AV receiver that has an optical digital input. Connect using a commercially available optical digital audio cable.

Connect using a commercially available optical digital audio cable (page 18).

• You may find it useful to have the manuals supplied with your other components handy when connecting this player.

• If you come across any unfamiliar terms
in this section of the manual, turn to the	13
Glossary on page 77.

En