Pioneer DV-667A-S, DV-563A, DV-667A-K operating instructions Additional information

Page 71

Additional information

Discs to avoid

Discs spin at high speed inside the player. If you can see that a disc is cracked, chipped, warped, or otherwise damaged, don't risk using it in your player—you could end up damaging it.

This player is designed for use with conventional, fully circular discs only. Use of shaped discs is not recommended for this product. Pioneer disclaims all liability arising in connection with the use of shaped discs.

Cleaning the unit’s exterior

Use a polishing cloth or dry cloth to wipe off dust and dirt. If the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth.

Do not use furniture wax or cleaners. Never use thinners, benzine or insecticide sprays or other chemicals on or near this unit since they will corrode the surfaces.

If you use a chemical-impregnated cleaning cloth, read the instructions carefully before use.

Unplug the unit when cleaning.

10

Cleaning the pickup lens

The DVD player’s lens should not become dirty in normal use, but if for some reason it should malfunction due to dust or dirt, consult your nearest Pioneer-authorized service center. Although lens cleaners for CD players are commercially available, we do not recommend using them since some may damage the lens.

Problems with condensation

Condensation may form inside the player if it is brought into a warm room from outside, or if the temperature of the room rises quickly.

Although the condensation won’t damage the player, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.

Hints on installation

We want you to enjoy using this product for years to come, so please bear in mind the following points when choosing a suitable location for it:

Do...

Use in a well-ventilated room.

Place on a solid, flat, level surface, such as a table, shelf or stereo rack.

Don’t...

Use in a place exposed to high temperatures or humidity, including near radiators and other heat-generating appliances.

Place on a window sill or other place where the player will be exposed to direct sunlight.

Use in an excessively dusty or damp environment.

71

En

Image 71
Contents DV-563ADV-667A-SDV-667A-K Important Safety Instructions Important Notice For U.S. modelFor Canadian model On the bonnet of the unit Operating Environment H045EnContents Additional information Audio Settings menuVideo Adjust menu Initial Settings menuBefore you start Chapter FeaturesBefore you start Before you start What’s in the box Putting the batteries in the remote controlGeneral disc compatibility Disc / content format playback compatibilityUsing the remote control Before you startCompressed audio compatibility CD-R/RW compatibilityDVD-R/RW compatibility PC-created disc compatibilityJpeg file compatibility Audio OUT 2ch Connecting upConnecting up Chapter Rear panel connectionsConnecting up Easy connections Connecting using the S-video output Connecting upUsing other types of video output Component Video Connecting up Connecting using the component video outputConnecting using the multichannel analog outputs Connecting up Connecting for multichannel surround soundConnecting up Connecting to an AV receiver If your TV has no inputs you can’t use this player with it Front panel Controls and displaysControls and displays Chapter 15 DTS Controls and displays Display1CH Character displayPress to display or exit the on-screen display Controls and displays Remote controlPress to select a subtitle display see Number buttonsPress to clear a numeric entry Press to activate/switch off 2V/SRS TruSur- roundControls and displays Press to open or close the disc trayLet’s Get Started Switching onGetting started Getting started ChapterGetting started Using the on-screen displaysIf a disc is playing, press stop Setting up with the Setup NavigatorSelect ‘Setup Navigator’ Menu playSelect a DVD language DTS Press OPEN/CLOSE to open the disc tray Congratulations, setup is completePlaying discs Press play to start playback Load a discShows Resume or Last MEM Basic playback controlsFront panel controls DVD disc menusResume and Last Memory Video CD/Super VCD PBC menus Introduction Playing discsPlaying discs Chapter DVD-RW Frame advance/frame reverse Playing discs Scanning discsPlaying in slow motion Press Enter on ‘BEnd Point’ to set the loop end point Using repeat playLooping a section of a disc Press Enter on ‘AStart Point’ to set the loop start pointTitle Repeat or Chapter Repeat or Repeat Off Select a repeat play optionSelect a random play option Playing discs Using random playThen press Cursor right and select a Chapter from the list Playing discs Creating a program listSelect ‘Create/Edit’ from the list of program options To add a chapter, first highlight the titleTo play the program list, press play Repeat to build up a program ListSelect a program play function Create/Edit See above Editing a program listOther functions available from the program menu Press Subtitle repeatedly to select a subtitle option Switching subtitlesPlaying discs Searching a disc Press Enter to start playbackSwitching DVD-Audio audio channels Playing discs Switching DVD-Video audio languageSwitching VR format DVD-RW audio channels Displaying disc information Switching camera anglesPlaying discs Zooming the screen During multichannel playback only DVD-Audio displaysVR format DVD-RW displays Sacd displaysPress Menu to display the Disc Navi- gator screen Viewing Jpeg discsViewing Jpeg discs Chapter Viewing Jpeg discsTo resume the slideshow, press play Using the Photo BrowserUse the cursor buttons Highlight a thumbnail picture Use the cursor buttons Change the zoomed areaVirtual Surround Audio Settings menuAudio Settings menu Chapter Audio DRCTo ‘Fix’ or ‘Variable’, as required Audio Settings menuChannel Level Select a speaker Speaker DistanceUse Creating your own presets Video Adjust menuVideo Adjust menu Chapter Video AdjustVideo Adjust menu Digital Audio Out settings Initial Settings menuInitial Settings menu Chapter Using the Initial Settings menuLinear PCM Out Initial Settings menuDolby Digital Out DTS OutComponent Out Video Output settingsMpeg Out TV ScreenSTANDBY/ON while Default setting InterlacePressing To switch the player About progressive scan videoCompatibility of this unit with progressive-scan TVs Language settingsVideo Out Audio LanguageDVD Menu Language Default setting w/Subtitle LangSubtitle Language On Screen Display Display settingsOSD Language Subtitle DisplayParental Lock Angle IndicatorOptions Use the number buttons to enter a 4- digit password Registering a new passwordChanging your password Select ‘Password’Setting/changing the Country code Setting/changing the Parental Lock levelAuto Disc Menu Bonus GroupSacd Playback DVD Playback ModeGroup Playback DTS DownMix Audio Output ModeSpeakers PhotoViewerSpeaker Installation Speaker Use Cursor up/down to Change the distance Speaker Distance Channel Level Speaker distance for the highlightedDifferent speaker Handling discs Additional informationAdditional information Chapter Taking care of your player and discsAdditional information Widescreen TV users Power cable cautionScreen sizes and disc formats Moving the playerCDs, SACDs and Video CDs/Super VCDs are divided into tracks Resetting the playerTitles, chapters, groups and tracks Additional information DVD-Video regions Selecting languages using the language code listDTS CD About the audio output settingsCountry, Country code, Country code letter Additional information Language code listCountry code list Language Language code letter, Language codeAdditional information Glossary ISO 9660 format File extensionPacked PCM DVD-Audio only Interlaced videoSlidshow DVD, Video CD/Super VCD S1 S-video outputS2 S-video output Sampling frequencyPress Setup TV system changes as follows Additional information Setting the TV SystemWatching Ntsc on a PAL TV Additional information Troubleshooting No audio, or audio is distorted Picture disturbance during playback or the picture is darkTracks won’t play DVD and CD volumeTruSurround Linear PCM DVD Make sure that Audio Output Mode is set to 2 ChannelAdditional information Specifications Additional information Pioneer Corporation