DVD and CD volume, Tracks won’t play | Pioneer DV-563A, DV-667A-K

10Additional information

Problem	Remedy
Noticeable difference in • This is due to differences in the audio format and is not a
DVD and CD volume.	malfunction.

Cannot play multi-	• Make sure that Audio Output Mode is set to 5.1 Channel
channel audio	(page 66).
	• Check that the Dolby Digital, DTS and MPEG Out settings
	(pages 55–56) are suitable for your amplifier/receiver—check the
	instruction manual that came with your amplifier/receiver.
	• DVD-Audio and SACDs do not output multichannel digital audio.
	Listen through the player’s analog outputs.
	• Check that the settings in the Speaker Installation screen are
	correct (page 67).
	• Check the audio options available from the disc menu.

Cannot listen to high-	• Make sure that Linear PCM Out is set to Down Sample Off
sampling rate audio	(page 55).
through the digital	• As a copy-protection measure, some DVDs do not output 96kHz
output.	audio. In this case, even if set to Down Sample Off, the player
	automatically outputs the audio at 48 kHz. This is not a malfunction.

Cannot output 192kHz or • The player does not output digital audio at these sampling rates. The

176.4kHz digital audio. digital output is automatically downsampled.

Cannot output 96kHz or • Check that Linear PCM Out is set to Down Sample Off (page 55).

88.2kHz digital audio. • Some discs are digital copy protected and do not output high sampling rate digital audio. In this case the output is automatically downsampled.

No DTS audio output. • If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set DTS Out to DTS > PCM (page 55). If you do not do this, noise will be output when you play a DTS disc.

•If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the amplifier settings, and that the cable is properly connected.

Audio mix does not sound right or sounds incomplete (for example, inaudible dialog).

•Make sure that Audio Output Mode is set to 2 Channel if you've connected to the stereo inputs on your amplifier or TV (page 66).

Disc containing the MP3 • This player is compatible with multi-session discs, but only plays

tracks won’t play.	sessions that are closed.
	• If the message Can’t play this format is displayed (NO PLAY in the
	front panel display) when you try to play a disc/track, check the audio
	file formats. For more information see page 10.

10Additional information

Problem

Remedy

DVD and CD volume.

tracks won’t play.

sessions that are closed.