Pioneer DV-563A, DV-667A-K, DV-667A-S operating instructions Speaker Distance, Use, Select a speaker

Page 51

Audio Settings menu

07

4Variable setting only: Set the channel levels for each speaker.

2 press (cursor down) until you reach the Speaker Distance setting screen.

 

Audio Settings

2/ 3 page

 

 

 

 

 

 

Channel Level L

0.0 dB

 

 

 

 

 

 

 

 

 

 

Channel Level C

0.0 dB

 

 

Channel Level R

0.0 dB

 

 

Channel Level RS

0.0 dB

 

 

Channel Level LS

0.0 dB

 

 

Channel Level SW

0.0 dB

 

 

 

 

 

 

 

• Use the

buttons (cursor up/down) to

select a speaker.

• Use the

buttons (cursor left/right)

to adjust the channel level for that speaker.

Channel levels can be set from –6 dB to +6 dB in 1.0 dB increments.

5Press ENTER to make the settings and exit the audio settings screen.

You can’t adjust the channel level for any speakers that are set to Off in the Speaker Installation menu screen (page 67).

The Fix setting is equivalent to setting all the channel levels to +6 dB. Therefore, the Variable setting will usually sound quieter than the Fix setting.

Speaker Distance

• Default setting: all speakers 10 ft. (3 m)

To get the best surround sound from your system, you should set up the speaker distances from your listening position.

1Press SETUP and select ‘Audio Settings’ from the on-screen display.

 

Audio Settings

3/ 3 page

 

 

 

 

 

Speaker Distance L

10 ft.

 

 

 

Speaker Distance C

10 ft.

 

 

 

Speaker Distance R

10 ft.

 

 

 

Speaker Distance RS

 

 

 

 

10 ft.

 

 

 

Speaker Distance LS

 

 

 

 

10 ft.

 

 

 

 

 

 

 

DV-563A screen

• Use the

buttons (cursor up/down) to

select a speaker.

• Use the

buttons (cursor left/right)

to adjust the distance from your listening position to that speaker.

Front left/right (L/R) speaker distances can be set from 1 ft. (30 cm) to 30 ft. (9 m) in 1 ft. (30 cm). increments.

The center speaker (C) can be set from –5 ft. (1.5 m) to 0 ft. (0 m) relative to the front left/ right speakers.

Surround left/right (LS/RS) speakers can be set from –15 ft. (4.5 m) to 0 ft. (0 m) relative to the front left/right speakers.

You can’t set the subwoofer (SW) distance.

When you adjust the front left (L) or front right (R) speaker, all the other speaker distances are adjusted relative to that speaker.

3Press ENTER to make the settings and exit the audio settings screen.

When playing DVD-Video and DVD-Audio material with a sampling rate of 88 kHz or higher, the speaker distance settings of the center (C) can be adjusted up to a maximum of –3 ft. (0.9 m), and the surround speakers (LS/RS) up to a maximum of –7 ft. (2.1 m).

51

En

Image 51
Contents DV-563ADV-667A-SDV-667A-K Important Safety Instructions Important Notice For U.S. modelFor Canadian model On the bonnet of the unit Operating Environment H045EnContents Additional information Audio Settings menuVideo Adjust menu Initial Settings menuFeatures Before you startBefore you start Chapter Before you start What’s in the box Putting the batteries in the remote controlGeneral disc compatibility Disc / content format playback compatibilityUsing the remote control Before you startCompressed audio compatibility CD-R/RW compatibilityDVD-R/RW compatibility PC-created disc compatibilityJpeg file compatibility Audio OUT 2ch Connecting upConnecting up Chapter Rear panel connectionsConnecting up Easy connections Connecting up Using other types of video outputConnecting using the S-video output Component Video Connecting up Connecting using the component video outputConnecting using the multichannel analog outputs Connecting up Connecting for multichannel surround soundConnecting up Connecting to an AV receiver If your TV has no inputs you can’t use this player with it Controls and displays Controls and displays ChapterFront panel 15 DTS Controls and displays Display1CH Character displayPress to display or exit the on-screen display Controls and displays Remote controlPress to select a subtitle display see Number buttonsPress to clear a numeric entry Press to activate/switch off 2V/SRS TruSur- roundControls and displays Press to open or close the disc trayLet’s Get Started Switching onGetting started Getting started ChapterGetting started Using the on-screen displaysIf a disc is playing, press stop Setting up with the Setup NavigatorSelect ‘Setup Navigator’ Menu playSelect a DVD language DTS Congratulations, setup is complete Playing discsPress OPEN/CLOSE to open the disc tray Press play to start playback Load a discShows Resume or Last MEM Basic playback controlsDVD disc menus Resume and Last MemoryFront panel controls Video CD/Super VCD PBC menus Playing discs Playing discs ChapterIntroduction DVD-RW Playing discs Scanning discs Playing in slow motionFrame advance/frame reverse Press Enter on ‘BEnd Point’ to set the loop end point Using repeat playLooping a section of a disc Press Enter on ‘AStart Point’ to set the loop start pointTitle Repeat or Chapter Repeat or Repeat Off Select a repeat play optionSelect a random play option Playing discs Using random playThen press Cursor right and select a Chapter from the list Playing discs Creating a program listSelect ‘Create/Edit’ from the list of program options To add a chapter, first highlight the titleTo play the program list, press play Repeat to build up a program ListEditing a program list Other functions available from the program menuSelect a program play function Create/Edit See above Press Subtitle repeatedly to select a subtitle option Switching subtitlesPlaying discs Searching a disc Press Enter to start playbackPlaying discs Switching DVD-Video audio language Switching VR format DVD-RW audio channelsSwitching DVD-Audio audio channels Switching camera angles Playing discs Zooming the screenDisplaying disc information During multichannel playback only DVD-Audio displaysVR format DVD-RW displays Sacd displaysPress Menu to display the Disc Navi- gator screen Viewing Jpeg discsViewing Jpeg discs Chapter Viewing Jpeg discsTo resume the slideshow, press play Using the Photo BrowserUse the cursor buttons Highlight a thumbnail picture Use the cursor buttons Change the zoomed areaVirtual Surround Audio Settings menuAudio Settings menu Chapter Audio DRCAudio Settings menu Channel LevelTo ‘Fix’ or ‘Variable’, as required Speaker Distance UseSelect a speaker Creating your own presets Video Adjust menuVideo Adjust menu Chapter Video AdjustVideo Adjust menu Digital Audio Out settings Initial Settings menuInitial Settings menu Chapter Using the Initial Settings menuLinear PCM Out Initial Settings menuDolby Digital Out DTS OutComponent Out Video Output settingsMpeg Out TV ScreenSTANDBY/ON while Default setting InterlacePressing To switch the player About progressive scan videoCompatibility of this unit with progressive-scan TVs Language settingsVideo Out Audio LanguageDefault setting w/Subtitle Lang Subtitle LanguageDVD Menu Language On Screen Display Display settingsOSD Language Subtitle DisplayAngle Indicator OptionsParental Lock Use the number buttons to enter a 4- digit password Registering a new passwordChanging your password Select ‘Password’Setting/changing the Country code Setting/changing the Parental Lock levelAuto Disc Menu Bonus GroupDVD Playback Mode Group PlaybackSacd Playback DTS DownMix Audio Output ModeSpeakers PhotoViewerSpeaker Installation Speaker Use Cursor up/down to Change the distance Speaker DistanceChannel Level Speaker distance for the highlightedDifferent speaker Handling discs Additional informationAdditional information Chapter Taking care of your player and discsAdditional information Widescreen TV users Power cable cautionScreen sizes and disc formats Moving the playerResetting the player Titles, chapters, groups and tracksCDs, SACDs and Video CDs/Super VCDs are divided into tracks Additional information DVD-Video regions Selecting languages using the language code listDTS CD About the audio output settingsCountry, Country code, Country code letter Additional information Language code listCountry code list Language Language code letter, Language codeAdditional information Glossary ISO 9660 format File extensionPacked PCM DVD-Audio only Interlaced videoSlidshow DVD, Video CD/Super VCD S1 S-video outputS2 S-video output Sampling frequencyPress Setup Additional information Setting the TV System Watching Ntsc on a PAL TVTV system changes as follows Additional information Troubleshooting No audio, or audio is distorted Picture disturbance during playback or the picture is darkTracks won’t play DVD and CD volumeTruSurround Linear PCM DVD Make sure that Audio Output Mode is set to 2 ChannelAdditional information Specifications Additional information Pioneer Corporation