Pioneer DV-667A-K, DV-563A, DV-667A-S operating instructions Speaker Installation

Initial Settings menu 09

•Some DVD-Audio discs don’t allow down- mixing of audio. These discs always output multi-channel audio regardless of the setting made here.

Speaker Installation

•Set in Setup Navigator (default: L/R: Large

C: Large LS/RS: LargeSW: On )

You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.

This setting does not affect digital audio output.

Initial Settings
Digital Audio Out	Audio Output Mode ‰ 2 Channel
Video Output	Speaker Installation
Language	Speaker Distance
Display	Channel Level	‰ Fix
Options
Speakers

Use the Speaker Installation screen to tell the player what kinds of speakers you have connected.

1 Use the (cursor up/down) buttons to select a speaker

•The L and R, and RS and LS speakers are paired; you can’t set them differently.

Initial Settings
Digital Audio Out
Video Output	L	Large
Language	C	Large
Display	R	Large
Options	RS	Large
Speakers	LS	Large
	SW	On

2	Press	(cursor right) to modify the
selected speaker.
3	Use the	(cursor up/down)

buttons to change the current setting.

•You can see the effect of your changes in the room graphic on the right of the screen.

•Except for the subwoofer, you can set speaker size to Large or Small. If the main speaker cone in the speaker is 12cm or more, set to Large, otherwise set to Small (or Off if you don’t have that speaker).

•If you set the front L and R speakers to Small, the center and surround speakers are automatically set to Small and the subwoofer to On.

•The subwoofer can only be set to On or Off.

4 Press (cursor left) to go back to the speaker list if you want to modify another speaker, or press ENTER to exit the Speaker Installation screen.

•For LPCM DVD-Audio only, if the C, LS, or RS speakers is set to Off, the audio is automatically downmixed to stereo.

67

En